Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NEFA FS Reagent R2
- Product Code
- 1 5781 XX XX XXX
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for in-vitro diagnostics in human samples
Manufacturers & Suppliers
DiaSys Diagnostic Systems GmbH
manufacturer
Alte Strasse 9, 65558 Holzheim
+49 (0) 6432-9146-0
http://www.diasys.de
Emergency Contacts
Infraserv
+49 (0) 69-305-6418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution of inorganic salts and organic compounds.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohol, secondary, C12-C14, ethoxylated | 84133-50-6 | 3% | Yes |
| 2-[bis(2-Hydroxyethyl)amino] ethanesulphonic acid EC: 233-465-5 | 10191-18-1 | 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Seek medical aid in case of troubles.
Take off contaminated clothing and wash it before reuse. Remove residues with water. Seek medical aid in case of troubles.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently seek the immediate attention of an ophthalmologist.
Symptoms: Causes serious eye damage.
Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Seek medical attention.
Immediate Medical Attention
Subsequently seek the immediate attention of an ophthalmologist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is non-combustible. Extinguishing materials should therefore be selected according to surroundings.
Fires in the immediate vicinity may cause the development of dangerous vapours.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. Keep unprotected people away. Avoid breathing vapours/spray. Take off contaminated clothing and wash it before reuse.
Do not allow to penetrate into soil, waterbodies or drains.
Soak up with absorbent materials, wash spill area with plenty of water.
Materials: sand, siliceus earth, acid- or universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wear appropriate protective equipment. Keep all containers, equipment and working place clean. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Have eye wash bottle or eye rinse ready at work place. Avoid breathing vapours/spray. Take off contaminated clothing and wash it before reuse.
Keep containers tightly closed and at a temperature between 2 °C and 8 °C. Do not freeze. Protect from light. Keep sterile.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Take off contaminated clothing and wash it before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and/or an exhaust system in the work area.
Protective gloves according to EN 374. Glove material: Butyl caoutchouc (butyl rubber) - Breakthrough time: >480 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166.
Use a breathing protection against vapours/aerosol. Use combination filter type A/P according to EN 14387.
Wear suitable protective clothing.
Refer to "6.2 Environmental precautions".
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Refer to subsection 'Possibility of hazardous reactions'.
No hazardous reaction when handled and stored according to provisions.
Protect from frost, heat and sunlight.
No data available
No hazardous decomposition products when regulations for storage and handling are observed. Thermal decomposition: No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available regarding the partition coefficient.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
General information: Do not allow to enter into ground-water, surface water or drains.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Special waste. Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NEFA FS Reagent R2?
The signal word is danger.
What is the physical form of NEFA FS Reagent R2?
NEFA FS Reagent R2 is a liquid appearing as yellow up to brownish, clear with yellow up to brownish, clear color. It has no characteristic odour odor.
What is NEFA FS Reagent R2 used for?
Reagent for in-vitro diagnostics in human samples
What are the hazard statements for NEFA FS Reagent R2?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.