Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NEFA FS Reagent R1
- Product Code
- 1 5781 XX XX XXX
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for in-vitro diagnostics in human samples
Manufacturers & Suppliers
DiaSys Diagnostic Systems GmbH
manufacturer
Alte Strasse 9, 65558 Holzheim
+49 (0) 6432-9146-0
http://www.diasys.de
Emergency Contacts
Infraserv
+49 (0) 69-305-6418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution of anorganic salts and organic compounds.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Octylphenoxypolyethoxyethanol | 9002-93-1 | 2.5% | Yes |
| 2-[bis(2-Hydroxyethyl)amino] ethanesulphonic acid EC: 233-465-5 | 10191-18-1 | 2% | Yes |
This mixture contains the following substances of very high concern (SVHC) which are included in the Candidate List according to Article 59 of REACH: Octylphenoxypolyethoxyethanol (EQC)
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Change contaminated clothing. Remove residues with water.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms, consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Seek medical attention. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is non-combustible. Extinguishing materials should therefore be selected according to surroundings.
Fires in the immediate vicinity may cause the development of dangerous vapours.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Do not allow to penetrate into soil, waterbodies or drains.
Soak up with absorbent materials. Wash spill area with plenty of water.
Materials: sand, siliceus earth, acid- or universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Keep all containers, equipment and working place clean.
Keep containers tightly closed and at a temperature between 2 °C and 8 °C. Do not freeze. Protect from light. Keep sterile.
Keep all containers, equipment and working place clean.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and/or an exhaust system in the work area.
Protective gloves according to EN 374. Glove material: Butyl caoutchouc (butyl rubber)-Breakthrough time: >480 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166.
Use a breathing protection against vapours/aerosol. Use combination filter type A/P according to EN 14387.
Lab coat
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
refer to 10.3
No hazardous reactions known.
Protect against heat /sun rays.
no data available
In case of fire may be liberated: Nitrogen oxides (NOx), sulphur oxides, Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Special waste. Dispose of waste according to applicable legislation.
Special waste. Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not applicable
- Shipping Name
- Not restricted
- Transport Class
- not applicable
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For this substance a chemical safety assessment is not required.
Labelling of packaging with <= 125mL content: Signal word: Warning, Hazard statements: not applicable, Precautionary statements: not applicable
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NEFA FS Reagent R1?
The signal word is warning.
What is the physical form of NEFA FS Reagent R1?
NEFA FS Reagent R1 is a liquid appearing as colourless up to weak brown, clear with colourless up to weak brown color. It has odourless odor.
What is NEFA FS Reagent R1 used for?
Reagent for in-vitro diagnostics in human samples
What are the hazard statements for NEFA FS Reagent R1?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of NEFA FS Reagent R1?
The melting point is no data available and the boiling point is no data available.