NextSDS Logo
Safety Data Sheet EN

Air Wick Scented Oil - Fresh Waters

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Air Wick Scented Oil - Fresh Waters

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Air care products Consumer uses

Manufacturers & Suppliers

Reckitt Benckiser LLC. logo

Reckitt Benckiser LLC.

distributor

Morris Corporate Center IV, 399 Interpace Parkway (P.O. Box 225), Parsippany, New Jersey 07054-0225

+1 973 404 2600

http://www.rbnainfo.com

Reckitt Benckiser (Canada) Inc. logo

Reckitt Benckiser (Canada) Inc.

distributor

1680 Tech Avenue, Unit #2, Mississauga, Ontario L4W 5S9, CANADA

+1 905 283 7000

http://www.rbnainfo.com

Emergency Contacts

Emergency Contact

1-800-338-6167

CHEMTREC

1-800-424-9300

Chemtrec

703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 4
Acute Tox. Cat. 4
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

EUH066 Combustible liquid.
H312 Harmful in contact with skin.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from flames and hot surfaces. - No smoking.
P235 Keep cool.
P261 Avoid breathing vapor.
P264 Wash hands thoroughly after handling.
P272 Contaminated work clothing must not be allowed out of the workplace.
P280 Wear protective gloves.
P281 Wear protective clothing.
P282 Wear eye or face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or physician if you feel unwell.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P363 Wash contaminated clothing before reuse.
P403 Store in a well-ventilated place.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2,2-dimethyl-1,3-dioxolan-4-ylmethanol 100-79-8 30 - 60% No
d-Limonene 5989-27-5 5 - 10% No
Benzyl acetate 140-11-4 5 - 10% No
4-tert-Butylcyclohexyl acetate 32210-23-4 5 - 10% No
2-tert-Butylcyclohexyl acetate 88-41-5 5 - 10% No
Terpineol 8000-41-7 5 - 10% No
Dihydromyrcenol 18479-58-8 5 - 10% No
Allyl hexanoate 123-68-2 5 - 10% No
Isopropyl myristate 110-27-0 0.1 - 1% No
Linalool 78-70-6 0.1 - 1% No

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards.

Skin contact

Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. If necessary, call a poison center or physician. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Symptoms: Harmful in contact with skin. May cause an allergic skin reaction. Adverse symptoms may include the following: irritation, redness.

Eye contact

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.

Symptoms: Causes serious eye irritation. Adverse symptoms may include the following: pain or irritation, watering, redness.

Ingestion

Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards.

Immediate Medical Attention

If unconscious, place in recovery position and get medical attention immediately. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Medical Treatment

Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

Combustible liquid. Runoff to sewer may create fire or explosion hazard. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Avoid breathing vapor or mist. Provide adequate ventilation.

Small spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container.

Materials: inert dry material, non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Empty containers retain product residue and can be hazardous. Do not reuse container.

Storage

Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers.

Hygiene

Do not get in eyes or on skin or clothing. Do not ingest.

Fire prevention

Store and use away from heat, sparks, open flame or any other ignition source. Eliminate all ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Not available.
Colour Intensity
---
Form
---
Odor
Floral, Fruity
Odor Threshold
Not available.
Ph
Not available.
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
Closed cup: 86°C (186.8°F) [ASTM D93 equivalent]
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
0.99 to 1.1
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
Not available.
Partition Coefficient
Not available.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition.

Incompatible

Reactive or incompatible with the following materials: oxidizing materials

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Other adverse effects

No known significant effects or critical hazards.

No known significant effects or critical hazards.

Toxicity

Product/ingredient name | Result | Species | Exposure --- | --- | --- | --- d-Limonene | Acute EC50 421 μg/l Fresh water | Daphnia - Daphnia magna | 48 hours | Acute EC50 688 μg/l Fresh water | Fish - Pimephales promelas - Juvenile (Fledgling, Hatchling, Weanling) | 96 hours

12.1 Toxicity

| Product/ingredient name | Result | Species | Exposure | | --- | --- | --- | --- | | Linalool | Acute EC50 36.7 ppm Fresh water | Daphnia - Daphnia magna | 48 hours | | | Acute LC50 28.8 ppm Fresh water | Fish - Oncorhynchus mykiss | 96 hours | **Conclusion/Summary** : Based on available data, the classification criteria are not met.

Based on available data, the classification criteria are not met.

Persistence and degradability

| Product/ingredient name | Test | Result | | Dose | | Inoculum | | --- | --- | --- | --- | --- | --- | --- | | Linalool | - | 62.4 % - Readily - 28 days | | - | | - | | | | | | | | | | Product/ingredient name | Aquatic half-life | | Photolysis | | Biodegradability | | Linalool | - | | - | | Readily |

Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- |

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

Product/ingredient name: d-Limonene, LogPow: 4.38, BCF: -, Potential: high

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Not specified

12.2 Persistence and degradability

Not specified

12.3 Bioaccumulative potential

Benzyl acetate | 1.96 | 8 | low

12.4 Mobility in soil

Not specified

12.5 Results of PBT and vPvB assessment

Not specified

12.6 Endocrine disrupting properties

Not specified

12.7 Other adverse effects

Not specified

12.3 Bioaccumulative potential

Product/ingredient name: 4-tert-Butylcyclohexyl acetate, LogPow: 4.8, BCF: -, Potential: high

12.3 Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- | | Terpineol | 2.6 | 24.13 | low |

12.3 Bioaccumulative potential

Product/ingredient name: Dihydromyrcenol, LogPow: 3.25, BCF: -, Potential: low

12.3 Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- | | Allyl hexanoate | - | 102.3 | low |

12.3 Bioaccumulative potential

Product/ingredient name: Isopropyl myristate, LogPow: 7.71, BCF: -, Potential: high

Bioaccumulative potential

Linalool | 2.84 | - | low

Mobility in soil

Soil/water partition coefficient (Koc) : Not available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction.

Disposal

The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IMDG

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

Contains fragrance oils. If in eyes, rinse eyes with water. Remove any contact lenses and continue to rinse eyes for at least 15 minutes. Wash hands after handling. If reaction develops, discontinue use immediately and get medical attention. If swallowed, DO NOT induce vomiting. Call a physician or Poison Control Center immediately. DO NOT use in small, confined pet areas or other areas without adequate ventilation.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Air Wick Scented Oil - Fresh Waters?

The signal word is warning.

What is the physical form of Air Wick Scented Oil - Fresh Waters?

Air Wick Scented Oil - Fresh Waters is a liquid. with not available. color. It has floral, fruity odor.

What is the solubility of Air Wick Scented Oil - Fresh Waters?

Not available.

What is Air Wick Scented Oil - Fresh Waters used for?

Air care products Consumer uses

What are the hazard statements for Air Wick Scented Oil - Fresh Waters?

This substance has 4 hazard statements:

  • EUH066: Combustible liquid.
  • H312: Harmful in contact with skin.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.

What is the melting point of Air Wick Scented Oil - Fresh Waters?

The melting point is Not available. and the boiling point is Not available..