NextSDS Logo
Safety Data Sheet EN

6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one

CAS 1147124-23-9
EC 878-588-0

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one
Product Code
804878
Chemical Name
6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one

Regulatory Identifiers

CAS Number
1147124-23-9 Check regulations →
EC Number
878-588-0 Check regulations →

Identified Uses

Laboratory chemicals, Synthesis of substances

Manufacturers & Suppliers

S

Sigma-Aldrich

manufacturer

3050 Spruce Street, SAINT LOUIS MO 63103, USA

+1 800-325-5832

Emergency Contacts

CHEMTREC

+1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear eye protection/ face protection.
P280 Wear protective gloves.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313 If skin irritation occurs: Get medical advice/ attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/ physician if you feel unwell.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one EC: 878-588-0 1147124-23-9 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Skin contact

Wash off with soap and plenty of water. Consult a physician.

Eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Hands

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Eyes

Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Respiratory

For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
---
Solubility
---
Metal Corrosion
---
Physical State Data
solid
Dynamic Viscosity
---
Molecular Weight
---
Colour Intensity
---
Colour
dark red
Crystallisation Point
---
Solubility In Water
---
Physical State
powder
Relative Evaporation Rate
---
Solubility In Fat
---
Odor Threshold
---
Vapor Density
---
Relative Density
1.278 - 1.398 g/cm3
Appearance
---
Odor
---
Properties Status
---
Freezing Point
---
Auto Ignition Temperature
---
Explosive Limits
---
Cloud Point
---
Flash Point
---
Vapor Pressure
---
Kinematic Viscosity
---
Lower Explosive Limit
---
Upper Explosive Limit
---
Partition Coefficient
---
Voc Content
---
Form
powder
Density
---
Bulk Density
---
State Under Standard Conditions
---
Solidification Point
---
Softening Point
---
Decomposition Temperature
---
Melting Point
---
Boiling Point
579.1 - 689.1 °℃ (1,074.4 - 1,272.4 °F)
Ph
---
Flammability
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one?

The signal word is warning.

What is the physical form of 6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one?

6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one is a powder with dark red color.

What is 6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for 6-bromo-3-[6-bromo-1-(2-ethylhexyl)-1,2-dihydro-2-oxo-3H-indol-3-ylidene]-1-(2-ethylhexyl)-1,3-dihydro-2H-indol-2-one?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

Compliance Scanner

Scan your compliance