NextSDS Logo
Bo

BossCover SprayBond+ Drukvat

DANGER Vloeistof SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
BossCover SprayBond+ Drukvat

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

UFI Code
GWTX-N1FH-8309-YPPP

Unique Formula Identifier - for poison centres and emergency response

Uses Information

Identified Uses
Kleefmiddel

Overview

BossCover SprayBond+ Drukvat commonly used kleefmiddel.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Gevaar)

Hazard Classifications

Flam. Liq. Category 1 H224
Aquatic Chronic Category 2 H411
Skin Irrit. Category 2 H315
STOT SE Category 3 H336

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H224: Zeer licht ontvlambare vloeistof en damp.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H411: Giftig voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

  • P210: Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
  • P261: Inademing van stof/rook/gas/nevel/damp/spuitnevel vermijden.
  • P280: Beschermende handschoenen / oogbescherming dragen.
  • P305+P351+P338: Bij contact met de ogen: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
  • P312: Bij onwel voelen een ANTIGIFCENTRUM / arts raadplegen.
  • P403+P233: Op een goed geventileerde plaats bewaren. In goed gesloten verpakking bewaren.
  • P501: De inhoud en de verpakking verwerken volgens de plaatselijke / regionale / nationale / internationale voorschriften.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

BossCover Nederland company logo - Safety Data Sheet supplier organization

BossCover Nederland

manufacturer

πŸ“

De Poort 21, 4411 PB Rilland

🌍

NL

πŸ“ž

+ 31 113 55 77 83

BossCover BelgiΓ« company logo - Safety Data Sheet supplier organization

BossCover BelgiΓ«

distributor

πŸ“

Wijtschotbaan 7, 2900 Schoten

🌍

BE

πŸ“ž

+32 03 328 00 00

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Nationaal Vergiftigingen Informatie Centrum (NVIC)

πŸ“ž

088-755 8000

🌍

NL

πŸ’‘

Uitsluitend bestemd om professionele hulpverleners te informeren bij acute vergiftigingen.

Antigifcentrum

πŸ“ž

070 245 245

🌍

BE

Antigifcentrum

πŸ“ž

8002 5500

🌍

LU

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Mengsel van onderstaande stoffen met ongevaarlijke bijmengingen.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Γ©ther mΓ©thylique
EC: 204-065-8
115-10-6 20-40% ⚠️ Hazardous
Cyclohexaan
EC: 203-806-2
110-82-7 10-20% ⚠️ Hazardous
nafta (aardolie), met waterstof behandeld licht
EC: 265-151-9
64742-49-0 10-20% ⚠️ Hazardous
n-butylacetaat aceton
EC: 200-662-2
67-64-1 5-10% ⚠️ Hazardous
zinkbis(dibutyldithiocarbamaat)
EC: 205-232-8
136-23-2 0.5% ⚠️ Hazardous

Additional Information

Nafta, ingedeeld en gekenmerkt volgens RL 67/548/EG, VO(EG) 1272/2008; bepaling P [bevat Benzeen (CAS: 71-43-2) < 0,1 Gew%]. De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Bij bewusteloosheid ligging en vervoer in stabiele zijligging. Als het slachtoffer niet ademt: Voer mond-op-mond of mond-op-neus reanimatie uit, neem onmiddellijk contact op met de noodarts.

πŸ–οΈ Skin Contact

Onmiddellijk met water en zeep afwassen en goed naspoelen.

πŸ‘οΈ Eye Contact

Ogen bij geopend ooglid meerdere minuten met stromend water spoelen en dokter raadplegen.

🍽️ Ingestion/Swallowing

Mond spoelen met water. Als de klachten niet minderen, een arts raadplegen.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

πŸ§ͺ Physical State
Vloeistof
Critical Property
πŸ“Š Physical State Data
liquid
πŸ“Š State Under Standard Conditions
Not available
πŸ‘οΈ Appearance
Not available
🎨 Colour
Groen
πŸ“Š Colour Intensity
Not available
πŸ“Š Form
Vloeistof
πŸ‘ƒ Odor
Oplosmiddelachtig
πŸ“Š Odor Threshold
Niet bepaald
πŸ§ͺ Ph
Niet bruikbaar
🧊 Melting Point
Niet bepaald
Critical Property
πŸ’¨ Boiling Point
-24 ℃
Critical Property
πŸ”₯ Flash Point
-42 ℃
Critical Property
πŸ“Š Freezing Point
Not available
πŸ“Š Softening Point
Not available
πŸ“Š Solidification Point
Not available
πŸ“Š Cloud Point
Not available
πŸ“Š Crystallisation Point
Not available
πŸ“Š Relative Evaporation Rate
Not available
πŸ’¨ Evaporation Rate
Niet bepaald
πŸ’¨ Vapor Pressure
5.200 hPa
πŸ“Š Vapor Density
Niet bepaald
πŸ“Š Relative Density
0,7911 g/cm3
πŸ“Š Bulk Density
Not available
βš–οΈ Density
0,7911 g/cm3
Critical Property
πŸ”₯ Flammability
Het product ontbrandt niet van zichtzelf.
πŸ“Š Upper Explosive Limit
18,6 Vol %
πŸ“Š Lower Explosive Limit
1,3 Vol %
πŸ“Š Explosive Limits
Not available
πŸ“Š Auto Ignition Temperature
Niet bepaald
πŸ“Š Decomposition Temperature
Niet bepaald
πŸ’§ Solubility
Niet resp. gering mengbaar.
πŸ“Š Partition Coefficient
Niet bepaald
πŸ“Š Solubility In Water
Niet resp. gering mengbaar.
πŸ“Š Solubility In Fat
Not available
πŸ“Š Molecular Weight
Not available
πŸ“Š Voc Content
592,6 g/l
πŸ“Š Metal Corrosion
Not available
πŸ“Š Dynamic Viscosity
400 mPas
πŸ“Š Kinematic Viscosity
Not available
πŸ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Geen aanvullende gegevens. Zie 7.

🧀 Hand Protection

Handschoenen (schuren) (EN388(4.1.3.1)). Handschoenen uit butyl rubber (EN374, EN388:4101). Permeatiedoorbraaktijden volgens EN374-3:2003 (minuten) > 480 minuten. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Tijdens het dragen van beschermende handschoenen is het aan te bevelen om katoenen onderhandschoenen (voor éénmalig gebruik) te dragen. Deze onderhandschoenen dienen na gebruik weggegooid te worden ter voorkoming van potentiële blootstelling aan geabsorbeerd product. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve voor het gebruik worden getest. Doordringingstijd van het handschoenmateriaal: De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee. Voor een langdurig contact zijn handschoenen uit de volgende materialen geschikt: Butylrubber. Voor een contact van maximaal 15 minuten zijn handschoenen uit de volgende materialen geschikt: Butylrubber.

πŸ‘οΈ Eye Protection

Nauw aansluitende veiligheidsbril. Veiligheidsbril (EN166).

😷 Respiratory Protection

Stofmasker FFP3 (Filtering Facepiece Particles) (EN 149:2001). Bij onvoldoende ventilatie ademhalingsbescherming. Het zuurstofgehalte van de ingeademde lucht moet voldoende zijn > 17%. Bij korte of geringe belasting ademfiltertoestel; bij intensieve resp. langdurige expositie een van de omringende lucht onafhankelijk ademhalingstoestel gebruiken. Filter AXP3 (EN371).

🦺 Skin/Body Protection

Draag geschikte beschermende arbeidskleding (EN 340, 463, 468, 943-1, 943-2).

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN3501

πŸ“¦ Proper Shipping Name

CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S. (DIMETHYL ETHER, CYCLOHEXANE), MARINE POLLUTANT CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S.

⚠️ Transport Hazard Class

2 8F Gassen

πŸ“‹ Packing Group

vervalt

πŸš› ADR Transport Precautions

Waarschuwing: Gassen

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for BossCover SprayBond+ Drukvat?

The signal word for this substance is "danger".

What is the physical form of BossCover SprayBond+ Drukvat?

BossCover SprayBond+ Drukvat is a vloeistof with groen color. It has oplosmiddelachtig odor.

What is the solubility of BossCover SprayBond+ Drukvat?

Niet resp. gering mengbaar.

What is BossCover SprayBond+ Drukvat used for?

Kleefmiddel

What are the hazard statements for BossCover SprayBond+ Drukvat?

This substance has 4 hazard statements: H224: Zeer licht ontvlambare vloeistof en damp. H315: Veroorzaakt huidirritatie. H336: Kan slaperigheid of duizeligheid veroorzaken. H411: Giftig voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of BossCover SprayBond+ Drukvat?

The melting point is Niet bepaald and the boiling point is -24 ℃.