Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-Injekt GL-95 - Komponente A 2
- Product Code
- 607-132-00-3
Regulatory Identifiers
- CAS Number
- 2867-47-2 Check regulations →
- EC Number
- 220-688-8 Check regulations →
- REACH No.
- 01-2119474677-22
Identified Uses
Bouwchemie, Injektionsstoffe
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
MC-BAUCHEMIE Müller
manufacturer
Am Kruppwald 2-8, D-46238 Bottrop
+49(0)2041 101-0
MC-Bouwchemie
national supplier
Het Eek 9b, NL-4004 Lm Tiel
+31(0)344 - 633700
MC-Bauchemie N.V.
national supplier
Intercity Business Park, Gen. De Wittelaan 17 A, B-2800 Mechelen
+32 (0)15 20 14 62
Emergency Contacts
Nationaal Vergiftigingen Informatie Centrum (NVIC)
+31 30 - 2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-dimethylaminoethylmethacrylaat EC: 220-688-8 | 2867-47-2 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Veel verse lucht aanvoeren en voor alle zekerheid een arts consulteren.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
Ogen bij geopend ooglid een aantal minuten met stromend water spoelen. Onmiddellijk een dokter roepen.
Immediate Medical Attention
Onmiddellijk een dokter roepen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, bluspoeder of waterstraal. Grotere brand met waterstraal of met schuim dat tegen alcohol bestand is bestrijden.
Krachtige waterstraal.
Geen verdere relevante informatie verkrijgbaar.
Firefighter Protection
Adembeschermingsapparaat dragen dat niet afhankelijk is van de omgevingslucht.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Indringen in afvalwater, riolering, putten of kelders verhinderen. Met veel water verdunnen.
Met vloeistofbindend materiaal opnemen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
MC-Injekt GL-95 - Komponente A 1
---
MC-Injekt GL-95 - Komponente A 3
---
MC-Injekt GL-95 - Komponente B
---
MC-Injekt GL-95 TX - Komponente B 1
---
MC-Injekt 2300 top - Komponente A
---
MC-Injekt 1264 compact - Komponente A
---
MC-Injekt 2300 top - Komponente B
---
MC-Injekt 1264 compact - Komponente B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Tegen hitte en directe zonnestralen beschermen. Aërosolvorming vermijden.
Tanks ondoordringbaar gesloten houden.
Geen bijzondere maatregelen noodzakelijk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Veiligheidshandschoenen. Bij keuze van het handschoenmateriaal dient men rekening te houden met de penetratietijden, de permeatiegraden en de juiste degradatie. Na het gebruik van handschoenen huidreinigingsmiddel en huidverzorgingsmiddel gebruiken. Handschoenmateriaal: Nitrielrubber, Butylrubber. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.
Schutbril. Montuurbril met zijbescherming dragen DIN-/ EN-normen: DIN EN 166.
Bij korte of geringe belasting ademfiltertoestel; bij intensieve resp. langdurige expositie een van de omringende lucht onafhankelijk ademhalingstoestel gebruiken. Filter AX
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke reacties bekend.
Geen verdere relevante informatie verkrijgbaar. Geen ontleding bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2522
- Shipping Name
- DIMETHYLAMINOETHYLMETHACRYLAAT
- Transport Class
- 6.1
- Packing Group
- II
Waarschuwing: Giftige stoffen
Waarschuwing: Giftige stoffen
Waarschuwing: Giftige stoffen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-Injekt GL-95 - Komponente A 2?
The signal word is danger.
What is the physical form of MC-Injekt GL-95 - Komponente A 2?
MC-Injekt GL-95 - Komponente A 2 is a vloeibaar appearing as lichtgeel with lichtgeel color. It has ammoniakachtig odor.
What is MC-Injekt GL-95 - Komponente A 2 used for?
Bouwchemie, Injektionsstoffe
What are the hazard statements for MC-Injekt GL-95 - Komponente A 2?
This substance has 4 hazard statements:
- H302: Schadelijk bij inslikken.
- H312: Schadelijk bij contact met de huid.
- H314: Veroorzaakt ernstige brandwonden.
- H317: Kan een allergische huidreactie veroorzaken.
What is the melting point of MC-Injekt GL-95 - Komponente A 2?
The melting point is -50 °C and the boiling point is 182 °C.