Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-Injekt GL-95 TX - Komponente B 1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Bouwchemie
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
MC-Bouwchemie
manufacturer
Het Eek 9b, 4004 LM Tiel
+31(0)344 - 633700
Emergency Contacts
Centre Antipoisons
(+32) 070 245 245
MCR
+49 / (0)700 24112112
MCR
+1 872 5888271
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C13-Alcohol,ethoxilate | 69011-36-5 | 1 - 1.5% | Yes |
| 1,2-benzisothiazool-3(2H)-on EC: 220-120-9 | 2634-33-5 | 0.025 - 0.036% | Yes |
| Bronopol EC: 200-143-0 | 52-51-7 | 0.0025 - 0.025% | Yes |
| 2-Methyl-2H-isothiazol-3-on EC: 220-239-6 | 2682-20-4 | 0.0015 - 0.025% | Yes |
| 2-Octyl-2H-isothiazol-3-on | 26530-20-1 | 0.00025 - 0.0015% | Yes |
| Mengsel van: 5-chloor-2-methyl-2H-isothiazol-3-on en 2-methyl-2H-isothiazol-3-on (3:1) | 55965-84-9 | 0.00025 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ga naar frisse lucht. Raadpleeg een arts als de symptomen aanhouden.
Onmiddellijk afwassen met zeep en veel water. Raadpleeg een arts als de huid geïrriteerd blijft.
Onmiddellijk spoelen met veel water gedurende minstens 10 minuten, ook onder de oogleden. Raadpleeg onmiddellijk een oogarts. Bezoek indien mogelijk een oogkliniek.
Spoel de mond met water. Geef nooit iets via de mond aan een bewusteloos persoon. NIET laten braken. Raadpleeg een arts als de symptomen aanhouden.
Immediate Medical Attention
Symptomatische behandeling zoeken.
Medical Treatment
Na inademing glucocorticoïde spray inhaleren.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Brandblusmaatregelen op omgeving afstemmen.
Geen verdere relevante informatie verkrijgbaar.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Geen speciale maatregelen noodzakelijk.
Met vloeistofbindend materiaal opnemen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
MC-Injekt GL-95 TX - Komponente B 1
---
MC-Injekt GL-95 - Komponente B
---
MC-Injekt GL-95 - Komponente A 1
---
MC-Injekt GL-95 - Komponente A 1
---
MC-Injekt GL-95 - Komponente A 2
CAS: 2867-47-2
MC-Injekt GL-95 - Komponente A 2
CAS: 2867-47-2
MC-Injekt GL-95 TR - Komponente A 2
---
MC-Injekt GL-95 - Komponente A 3
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Houd de verpakking goed gesloten. Voor voldoende ventilatie zorgen. Persoonlijke beschermingsmiddelen gebruiken. Stofvorming vermijden. Vermijd contact met huid, ogen en kleding. In de onmiddellijke nabijheid dienen oogdouchevoorzieningen aanwezig te zijn. Breng ongebruikt materiaal nooit terug in opslagcontainers.
Houd de verpakking goed gesloten.
Verwijderd houden van voedsel, drank en diervoeder. Niet eten, drinken of roken in het toepassingsgebied. Handen wassen voor de pauzes en aan het einde van het werk. Verontreinigde kleding onmiddellijk uittrekken.
Oxiderend; brandgevaar bij contact met brandbare materialen. Verwijderd houden van ontstekingsbronnen - Niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie sectie 7.
Beschermende handschoenen DIN/EN 374. Selecteer het handschoenmateriaal rekening houdend met de doorbraaktijden, permeatiesnelheden en degradatie. Gebruik huidreinigings- en huidverzorgingsproducten na het gebruik van handschoenen. Materiaal: Natuurlijk rubber, Doorbraaktijd: ≥ 8 h, Handschoendikte: 0,5 mm; Materiaal: Polychloropreen, Doorbraaktijd: ≥ 8 h, Handschoendikte: 0,5 mm; Materiaal: Nitrilrubber, Doorbraaktijd: ≥ 8 h, Handschoendikte: 0,35 mm; Materiaal: Butylrubber, Doorbraaktijd: ≥ 8 h, Handschoendikte: 0,5 mm; Materiaal: Fluorrubber, Doorbraaktijd: ≥ 8 h, Handschoendikte: 0,4 mm. Doordringingstijd van het handschoenmateriaal: zie 'Handschoenmateriaal'.
Montuurbril met zijbescherming dragen DIN-/ EN-normen: DIN EN 166.
Vereist indien grenswaarden worden overschreden. Vereist indien stofvorming optreedt. Ademhalingsbescherming volgens EN141. Aanbevolen filtertype: Deeltjesfilter:P2
Persoonlijke beschermingsmiddelen dragen
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen gevaarlijke reacties bekend.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-Injekt GL-95 TX - Komponente B 1?
The signal word is warning.
What is the physical form of MC-Injekt GL-95 TX - Komponente B 1?
MC-Injekt GL-95 TX - Komponente B 1 is a liquid appearing as witachtig with witachtig color. It has zwak, karakteristiek odor.
What is MC-Injekt GL-95 TX - Komponente B 1 used for?
Bouwchemie
What are the hazard statements for MC-Injekt GL-95 TX - Komponente B 1?
This substance has 3 hazard statements:
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of MC-Injekt GL-95 TX - Komponente B 1?
The melting point is niet bepaald and the boiling point is 100 °C (CAS: 7732-18-5 Water).