NextSDS Logo
Safety Data Sheet EN

Allyl alcohol

CAS 107-18-6
EC 203-470-7

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Allyl alcohol
Product Code
A15026
Chemical Name
Allyl Alcohol
Synonyms
2-propeen-1-ol, Vinylcarbinol, Propenylalcohol

Regulatory Identifiers

CAS Number
107-18-6 Check regulations →
EC Number
203-470-7 Check regulations →
REACH No.
01-2119452689-23-0000

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 3 H331
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapor.
H301 + H311 + H331 Toxic if swallowed, in contact with skin or if inhaled.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P361 Remove/Take off immediately all contaminated clothing.
P362 Take off contaminated clothing and wash before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
Allyl Alcohol EC: 203-470-7 107-18-6 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Toxic if inhaled. May cause respiratory irritation.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes skin irritation. Toxic in contact with skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye irritation.

Ingestion

Do not induce vomiting; immediately call for medical help.

Symptoms: Toxic if swallowed.

Immediate Medical Attention

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Butyl rubber, BR. Penetration time of glove material (in minutes) 480. Glove thickness 0.3 mm.

Eyes

Safety glasses.

Respiratory

Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Density
0.85 g/cm3 (7.093 lbs/gal)
Colour
---
Appearance
Pungent
Dynamic Viscosity
Not determined.
Explosive Limits
---
Auto Ignition Temperature
375 ℃ (707 ºF)
Solidification Point
---
Partition Coefficient
Not determined.
Voc Content
---
Melting Point
-129 ℃ (-200 °F)
Relative Density
Not determined.
Crystallisation Point
---
Vapor Pressure
24 hPa (18 mm Hg)
Cloud Point
---
Solubility
Fully miscible
Properties Status
---
State Under Standard Conditions
---
Odor Threshold
Not determined.
Freezing Point
---
Flash Point
22 °C (72 °F)
Kinematic Viscosity
Not determined.
Metal Corrosion
---
Boiling Point
95-97 ℃ (203-207 ºF)
Colour Intensity
---
Flammability
Not determined.
Molecular Weight
---
Odor
Pungent
Vapor Density
Not determined.
Lower Explosive Limit
2.5 Vol %
Physical State
Liquid
Physical State Data
liquid
Decomposition Temperature
Not determined
Evaporation Rate
Not determined.
Solubility In Water
Fully miscible
Solubility In Fat
---
Bulk Density
---
Softening Point
---
Ph
Not determined.
Form
Liquid
Upper Explosive Limit
18 Vol %
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1098
Shipping Name
Allyl alcohol
Transport Class
6.1 Toxic substances.
Packing Group
I
IMDG

F-E,S-D

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Allyl alcohol known by?

Allyl alcohol is also known as: 2-propeen-1-ol, Vinylcarbinol, Propenylalcohol

What is the hazard signal word for Allyl alcohol?

The signal word is danger.

What is the physical form of Allyl alcohol?

Allyl alcohol is a liquid appearing as pungent . It has pungent odor.

What is the solubility of Allyl alcohol?

Fully miscible

What is Allyl alcohol used for?

SU24 Scientific research and development

What are the hazard statements for Allyl alcohol?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

What is the melting point of Allyl alcohol?

The melting point is -129 ℃ (-200 °F) and the boiling point is 95-97 ℃ (203-207 ºF).

Compliance Scanner

Scan your compliance