Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Allyl chloride, stabilized
- Product Code
- AC102910000; AC102910010; AC102910025; AC102910050; AC102911000
- Synonyms
- 3-Chloropropene
Regulatory Identifiers
- CAS Number
- 107-05-1 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Acros Organics
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Symptoms: Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting
Wash off immediately with plenty of water for at least 15 minutes.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do NOT induce vomiting. Call a physician or poison control center immediately.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO₂). Dry chemical. Water mist may be used to cool closed containers. Chemical foam.
No information available
Flammable. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated.
Do not allow run-off from fire-fighting to enter drains or water courses.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment as required. Keep people away from and upwind of spill/leak. Evacuate personnel to safe areas. Remove all sources of ignition. Take precautionary measures against static discharges.
Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. Prevent product from entering drains. Local authorities should be advised if significant spillages cannot be contained.
Soak up with inert absorbent material. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Use only under a chemical fume hood. Do not breathe mist/vapors/spray. Do not ingest. If swallowed then seek immediate medical assistance. Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat, sparks and flame.
Do not get in eyes, on skin, or on clothing. Do not ingest.
Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
May form explosive peroxides.
None known, based on information available
None under normal processing. Hazardous polymerization may occur.
Keep away from open flames, hot surfaces and sources of ignition. Excess heat. Exposure to light. Incompatible products. Exposure to moist air or water.
Acids, Bases, Amines, Metals, Finely powdered metals
Carbon monoxide (CO), Carbon dioxide (CO₂), Phosgene, Hydrogen chloride gas
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1100
- Shipping Name
- ALLYL CHLORIDE
- Transport Class
- 3
- Packing Group
- I
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Allyl chloride, stabilized known by?
Allyl chloride, stabilized is also known as: 3-Chloropropene
What is the hazard signal word for Allyl chloride, stabilized?
The signal word is danger.
What is the physical form of Allyl chloride, stabilized?
Allyl chloride, stabilized is a liquid with colorless color. It has pungent odor.
What is Allyl chloride, stabilized used for?
Laboratory chemicals.
What are the hazard statements for Allyl chloride, stabilized?
This substance has 8 hazard statements:
- H225: Highly flammable liquid and vapor
- H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
- H341: Suspected of causing genetic defects
- H351: Suspected of causing cancer
- H372: Causes damage to organs through prolonged or repeated exposure
What is the melting point of Allyl chloride, stabilized?
The melting point is -136 °C / -212.8 °F and the boiling point is 44 - 46 °C / 111.2 - 114.8 °F @ 760 mmHg.