Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Sulprofos is a yellow substance commonly used laboratory chemicals, manufacture of substances.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS06
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H301: Toxic if swallowed or in contact with skin
- H330: Fatal if inhaled.
- H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements
- P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician.
- P302+P352: IF ON SKIN: Wash with plenty of soap and water.
- P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- P310: Immediately call a POISON CENTER or doctor/ physician.
- P320: Specific treatment is urgent (see supplemental first aid instructions on this label).
- P330: Rinse mouth.
- P361: Remove/Take off immediately all contaminated clothing.
- P363: Wash contaminated clothing before reuse.
- P391: Collect spillage.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
- P405: Store locked up.
- P501: Dispose of contents/ container to an approved waste disposal plant.
- P260: Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
- P264: Wash skin thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P271: Use only outdoors or in a well-ventilated area.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/ protective clothing.
- P284: Wear respiratory protection.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Sigma-Aldrich
manufacturer
3050 Spruce Street, SAINT LOUIS MO 63103, USA
US
+1 800-325-5832
+1 800-325-5052
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
+1-703-527-3887
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| O-Ethyl O-(4-methylthiophenyl) S-propyl dithiophosphate EC: 252-545-0 | 35400-43-2 | Not specified | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
🖐️ Skin Contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
👁️ Eye Contact
Flush eyes with water as a precaution.
🍽️ Ingestion/Swallowing
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
🚨 Immediate Medical Attention Required
no data available
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
✅ Suitable Extinguishing Media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
⚠️ Specific Fire Hazards
Carbon oxides, Sulphur oxides, Oxides of phosphorus
🛡️ Firefighter Protection Equipment
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
🚨 Emergency Procedures
Evacuate personnel to safe areas.
🌍 Environmental Precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
🧹 Cleanup Methods
dispose of as hazardous waste.
Cleanup Materials:
inert absorbent material
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
⚠️ Handling Precautions
• Avoid contact with skin and eyes.
• Avoid inhalation of vapour or mist.
🏪 Storage Conditions
• Keep container tightly closed in a dry and well-ventilated place.
• Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
🧤 Hand Protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
👁️ Eye Protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
😷 Respiratory Protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
🌍 Environmental Exposure Controls
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
✅ Chemical Stability
Stable under recommended storage conditions.
🧪 Incompatible Materials
Strong oxidizing agents
💨 Hazardous Decomposition Products
Other decomposition products - no data available
Ecological Information & Environmental Impact
Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data
🌱 Toxicity
🌱 Persistence and degradability
🌱 Bioaccumulative potential
🌱 Mobility in soil
🌱 Results of PBT and vPvB assessment
🌱 Other adverse effects
Waste Disposal & Treatment Methods
Waste disposal procedures, treatment methods, and regulatory compliance requirements
♻️ Waste Treatment Methods
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
🗂️ Product Disposal Recommendations
Dispose of as unused product.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
2810
📦 Proper Shipping Name
Toxic, liquids, organic, n.o.s. (O-Ethyl O-(4-methylthiophenyl) S-propyl dithiophosphate)
⚠️ Transport Hazard Class
6.1
📋 Packing Group
III
Regulatory Information & Compliance
Chemical regulations, safety assessments, and regulatory compliance status
📋 Regulatory Summary
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
❌ Chemical Safety Assessment
No chemical safety assessment has been performed for this substance.
ℹ️ Additional Regulatory Information
Acute Health Hazard, Chronic Health Hazard. No components are subject to the Massachusetts Right to Know Act. This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Sulprofos?
The signal word for this substance is "danger".
What is the physical form of Sulprofos?
Sulprofos is a liquid appearing as yellow with yellow color. It has no data available odor.
What is the solubility of Sulprofos?
insoluble
What is Sulprofos used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Sulprofos?
This substance has 3 hazard statements: H301: Toxic if swallowed or in contact with skin H330: Fatal if inhaled. H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Sulprofos?
The melting point is no data available and the boiling point is 155 - 158 °℃ (311 - 316 °F) at 0.129 hPa (0.097 mmHg).