Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Phosphorus (V) sulfide
- Product Code
- A17419
Regulatory Identifiers
- CAS Number
- 1314-80-3 Check regulations →
- EC Number
- 215-242-4 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphorus (V) sulfide EC: 215-242-4 | 1314-80-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder.
Water
If this product is involved in a fire, the following can be released: Phosphorus oxides, Sulfur oxides (SOx), Hydrogen sulfide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow material to be released to the environment without proper governmental permits.
Ensure adequate ventilation. Do not flush with water or aqueous cleansing agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace.
Store in a cool location. Store under dry inert gas. This product is moisture sensitive. Keep container tightly sealed. Store in cool, dry conditions in well sealed containers. Protect from humidity and water.
Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined
Safety glasses
Use suitable respirator when high concentrations are present.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Contact with water releases toxic gases, Contact with acids releases toxic gases
No further relevant information available.
Oxidizing agents, Alcohols, Water/moisture
Phosphorus oxides (e.g. P2O5), Sulfur oxides (SOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1340
- Shipping Name
- Phosphorus pentasulfide
- Transport Class
- 4.3
- Packing Group
- II
Warning: Substances which, in contact with water, emit flammable gases
Warning: Substances which, in contact with water, emit flammable gases
Warning: Substances which, in contact with water, emit flammable gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Phosphorus (V) sulfide?
The signal word is danger.
What is the physical form of Phosphorus (V) sulfide?
Phosphorus (V) sulfide is a powder with yellow color. It has like rotten eggs odor.
What is Phosphorus (V) sulfide used for?
SU24 Scientific research and development
What are the hazard statements for Phosphorus (V) sulfide?
This substance has 4 hazard statements:
- H228: Flammable solid.
- H261: In contact with water releases flammable gas.
- H301: Toxic if swallowed.
- H332: Harmful if inhaled.
What is the melting point of Phosphorus (V) sulfide?
The melting point is 286-290 °C (547-554 °F) and the boiling point is 514 °C (957 °F).