NextSDS Logo
Safety Data Sheet EN

gamma-Butyrolactone

CAS 96-48-0
EC 202-509-5

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
gamma-Butyrolactone
Product Code
A16314, L02954

Regulatory Identifiers

CAS Number
96-48-0 Check regulations →
EC Number
202-509-5 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Alfa Aesar

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/ ... /if you feel unwell.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor/ ...
P362 Take off contaminated clothing.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
gamma-Butyrolactone EC: 202-509-5 96-48-0 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Butyl rubber, BR. Penetration time of glove material (in minutes) 480. Glove thickness 0.3 mm.

Eyes

Tightly sealed goggles

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
Fully miscible
Density
1.054 g/cm3 (8.796 lbs/gal)
Appearance
Liquid, Colorless
Boiling Point
204-206 ℃ (399-403 ºF)
Lower Explosive Limit
2.7 Vol %
Relative Evaporation Rate
---
Molecular Weight
---
Cloud Point
---
Bulk Density
---
Physical State
Liquid
Dynamic Viscosity
1.7 mPas
Flammability
Not determined.
Crystallisation Point
---
Freezing Point
---
Physical State Data
liquid
Odor
Not determined
Solubility
Fully miscible
State Under Standard Conditions
---
Ph
4
Solubility In Fat
---
Form
Liquid
Colour Intensity
---
Decomposition Temperature
Not determined
Vapor Density
Not determined.
Relative Density
Not determined.
Partition Coefficient
Not determined.
Explosive Limits
---
Odor Threshold
Not determined.
Solidification Point
---
Evaporation Rate
Not determined.
Vapor Pressure
>1 hPa (>1 mm Hg)
Auto Ignition Temperature
445 °C (833 ºF)
Upper Explosive Limit
15.6 Vol %
Flash Point
98 °℃ (208 °F)
Colour
Colorless
Melting Point
-44 ℃ (-47 ºF)
Properties Status
---
Voc Content
---
Kinematic Viscosity
Not determined.
Metal Corrosion
---
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for gamma-Butyrolactone?

The signal word is danger.

What is the physical form of gamma-Butyrolactone?

gamma-Butyrolactone is a liquid appearing as liquid, colorless with colorless color. It has not determined odor.

What is the solubility of gamma-Butyrolactone?

Fully miscible

What is gamma-Butyrolactone used for?

SU24 Scientific research and development

What are the hazard statements for gamma-Butyrolactone?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of gamma-Butyrolactone?

The melting point is -44 ℃ (-47 ºF) and the boiling point is 204-206 ℃ (399-403 ºF).

Compliance Scanner

Scan your compliance