MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil Safety Data Sheet | liquid

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name

MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil

Regulatory Identifiers

CAS Number

N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses

gas engine oil for industrial and professional use.

Uses Advised Against

application other than the above.

Overview

MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil is a bright, clear substance commonly used gas engine oil for industrial and professional use..

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

N/A

Hazard Classifications

Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273: Avoid release to the environment.
P501: Dispose of contents/container in accordance with national regulation.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

MOL-LUB Lubricant Production Distribution and Service Ltd.

manufacturer

📍

H-2931 Almásfüzitő, Fő út 21., Hungary

🌍

📞

+36 34 526 330

📠

+36 34 526 391

MOL-LUB Lubricant Production Distribution and Service Ltd.

supplier

📍

H-2931 Almásfüzitő, Fő út 21., Hungary

🌍

📞

+36 80 201 296

📠

+36 34 348 010

MOL LUB Kft.

undefined

📞

+36 80 201 296

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Health Toxicological Information Service

📞

+36 34 526 210

🌍

🕒

07-1520 h on workdays

Health Toxicological Information Service

📞

+36 80 201 199

🌍

🕒

0-24 h, free number, can only be called from Hungary

National Health Toxicological Information Service

📞

+36 1 476 6464

🌍

🕒

0-24 h, can be called for a normal fee - also from abroad

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Mixture of refined mineral base oils containing additives.

Chemical Components & Hazardous Substances

Chemical Name	CAS Number	Concentration	Hazardous
Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1	64742-54-7	35-65%	⚠️ Hazardous
Mineral oil mixture	N/A	10%	⚠️ Hazardous
Distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7	64742-65-0	2%	⚠️ Hazardous
Reaction mass of isomers of: C7-9-alkyl 3-(3,5-di-tert- butyl-4-hydroxyphenyl) propionate EC: 406-040-9	125643-61-0	1.7%	⚠️ Hazardous
Bis(nonylphenyl)amine EC: 253-249-4	36878-20-3	1.7%	⚠️ Hazardous
Distillates (petroleum), solvent-dewaxed light paraffinic EC: 265-159-2	64742-56-9	1.7%	⚠️ Hazardous
Paraffin oils (petroleum), catalytic dewaxed heavy EC: 265-174-4	64742-70-7	1.7%	⚠️ Hazardous
Zinc bis[O-(6-methylheptyl)] bis[O-(sec-butyl)] bis(dithiophosphate) EC: 298-577-9	93819-94-4	1.1%	⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Remove the affected person to fresh air. If rapid recovery does not occur, obtain medical attention.

🖐️ Skin Contact

Remove contaminated clothing. Wash skin with large amounts of water, use soap. In case of persistent irritation, get medical attention.

👁️ Eye Contact

Flush eyes with plenty of water for 10-15 minutes. In case of persistent irritation, get medical attention.

🍽️ Ingestion/Swallowing

If swallowed, give water. Do not induce vomiting. Get medical attention.

🚨 Immediate Medical Attention Required

Not required.

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

✅ Suitable Extinguishing Media

Foam, carbon dioxide, dry chemical powder.

❌ Unsuitable Extinguishing Media

Full water jet.

⚠️ Specific Fire Hazards

On burning, carbon dioxide, carbon monoxide, sulphur oxides, phosphor oxides, various hydrocarbons and soot can be formed.

🛡️ Firefighter Protection Equipment

According to the existing fire-fighting regulations. Respiratory protection.

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

🌍 Environmental Precautions

Confine spills to prevent material from entering sewers, watercourses, drains and into soil. Notify relevant authority.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

MOL Essence SN 10W - 40 semi - synthetic motor oil

No identifier available

DEOMAX DM12 ULTRA SAE 10W40

No identifier available

Gearlube RPC 75W/80W

No identifier available

Q8 T 860 S 10W-40

No identifier available

RUBIA TIR 7400 15W40

No identifier available

MOL Spinol 3 spindle oil

No identifier available

CAT HYDRAULIC OIL (HYDO) SAE 10W

No identifier available

MS Lubricant

No identifier available

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🧪 Physical State

liquid

Critical Property

📊 Physical State Data

liquid

📊 State Under Standard Conditions

Not available

👁️ Appearance

bright, clear

🎨 Colour

Not available

📊 Colour Intensity

Not available

📊 Form

Not available

👃 Odor

characteristic

📊 Odor Threshold

Not available

🧪 Ph

not applicable

🧊 Melting Point

typ. - 42℃

Critical Property

💨 Boiling Point

not available

Critical Property

🔥 Flash Point

typ. 225℃

Critical Property

📊 Freezing Point

Not available

📊 Softening Point

Not available

📊 Solidification Point

Not available

📊 Cloud Point

Not available

📊 Crystallisation Point

Not available

📊 Relative Evaporation Rate

Not available

💨 Evaporation Rate

Not available

💨 Vapor Pressure

negligible

📊 Vapor Density

Not available

📊 Relative Density

not available

📊 Bulk Density

Not available

⚖️ Density

Not available

🔥 Flammability

combustible

📊 Upper Explosive Limit

not explosive

📊 Lower Explosive Limit

not explosive

📊 Explosive Limits

Not available

📊 Auto Ignition Temperature

not available

📊 Decomposition Temperature

not available

💧 Solubility

gasoline, kerosene, toluene, etc.

📊 Partition Coefficient

not available

📊 Solubility In Water

practically insoluble in water

📊 Solubility In Fat

Not available

📊 Molecular Weight

Not available

📊 Voc Content

Not available

📊 Metal Corrosion

Not available

📊 Dynamic Viscosity

Not available

📊 Kinematic Viscosity

Not available

📊 Properties Status

Not available

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

⚠️ Handling Precautions

• Keep general measures applied for normal operations with lubricants and flammable liquids.

• Keep away from radiant heat and open flame.

• Avoid contact with skin and eyes.

• Avoid prolonged breathing of oil vapours or mists.

• Wash hands before breaks and at end of work.

• Take off contaminated clothing and wash it before reuse.

• When using do not eat, drink or smoke.

• Avoid splashing the product.

🏪 Storage Conditions

• Store in dry, well-ventilated place in original, closed containers.

• Keep away from radiant heat, open flame and strong oxidizing agents.

🧼 General Hygiene Measures

Wash hands before breaks and at end of work. Take off contaminated clothing and wash it before reuse.

🔥 Fire Prevention Measures

Keep away from radiant heat and open flame.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Not required.

🧤 Hand Protection

Oil resistant gloves (EN 374, Breakthrough time > 480 min, PK power level: 6; PR flow rate: 0). Note: Manufacturer's directions for use and the conditions of application should be observed.

👁️ Eye Protection

Where splashing is possible, wear safety glasses (EN 166).

😷 Respiratory Protection

Under normal conditions not required. In case of exceeded exposure-limits respiratory protection with particle-filter is recommended.

🦺 Skin/Body Protection

Protective clothing (oil resistant).

🌍 Environmental Exposure Controls

Do not discharge into drains/surface waters/groundwater.

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

✅ Chemical Stability

No decomposition if stored and handled properly.

⚗️ Reactivity

Dangerous reactivity not known.

⚠️ Hazardous Reactions

Not known.

🚫 Conditions to Avoid

Direct heat or ignition sources.

🧪 Incompatible Materials

Strong oxidizing agents.

💨 Hazardous Decomposition Products

No dangerous decomposition products are formed under normal conditions. Hazardous combustion products: See Section 5.

Ecological Information & Environmental Impact

Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data

🌱 Toxicity

Harmful to aquatic life with long lasting effects. Components: Distillates (petroleum), solvent-dewaxed heavy paraffinic (CAS: 64742-65-0) Fishes: LC50 > 100 mg/L (literature data) Daphnia: EC50 > 100 mg/L (literature data) Other aquatic organisms: EC50 > 100 mg/L (literature data) Algae: ErC50 > 100 mg/L (literature data) Other living beings: TLM >1 mg/L (literature data) Distillates (petroleum), hydrotreated heavy paraffinic (CAS: 64742-54-7) Fishes: > 1000 mg/L 96 h (OECD 203) Daphnia: > 100 mg/L 48 h (OECD 202) Algae: > 100 mg/L 72 h (OECD 201) Reaction mass of isomers of: C7-9-alkyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (CAS: 125643-61-0) Fishes (Danio rerio): LC50 > 74 mg/L 96 h (OECD 203) Daphnia (Daphnia magna): EC50 > 100 mg/L 24 h (OECD 202) Algae (Desmodesmus subspicatus): EC50 >3 mg/L 72 h (OECD 201) Bis(nonylphenyl)amine (CAS: 36878-20-3) Fishes (Danio rerio): LC50 > 100 mg/L 96 h (OECD 203) Daphnia (Daphnia magna): EC50 > 100 mg/L 48 h (OECD 202) Algae (Desmodesmus subspicatus): EC50 > 100 mg/L 72 h (OECD 201) Distillates (petroleum), solvent-dewaxed light paraffinic (CAS: 64742-56-9) Fish: LC50 > 100 mg/L Other aquatic organisms: EC50 > 100 mg/L Algae: ErC50 > 100 mg/L Crustacea: NOEC >1 mg/L Zinc bis[O-(6-methylheptyl)] bis[O-(sec-butyl)] bis(dithiophosphate) (EC: 298-577-9) Fish (Oncorhynchus mykiss): LC50 4.5 mg/L 96 h (OECD 203) Daphnia magna: EL50 5.4 mg/L 48 h (OECD 202) Algae (Selenastrum capricornutum): EbC50 2.1 mg/L 96 h (OECD 201)

🌱 Persistence and degradability

Biodegradability: No data for the product. Zinc bis[O-(6-methylheptyl)] bis[O-(sec-butyl)] bis(dithiophosphate) (EC: 298-577-9) 1.5% (28 days, OECD 301B, conc.: 10 mg/L, aerobic, activated sludge) Not readily degradable. Molybdenum polysulphide long chain alkyl dithiocarbamate complex (EC: 457-320-2) 22.75% (29 days, OECD 301) Not readily degradable. Phenol, dodecyl-, branched (CAS: 121158-58-5) 25 % (28 days, OECD TG 301 B) 2,6-di-tert-butylphenol (CAS: 128-39-2) OECD TG 302 B, 24 %, 28 days, Not easily degradable. OECD TG 301 B, 5 %, 28 days, Not easily degradable.

🌱 Bioaccumulative potential

Zinc bis[O-(6-methylheptyl)] bis[O-(sec-butyl)] bis(dithiophosphate) (EC: 298-577-9) No data available. Log Pow: 0.9 (23℃) Molybdenum polysulphide long chain alkyl dithiocarbamate complex (EC: 457-320-2) 2,6-di-tert-butylphenol (CAS: 128-39-2) BCF: 88 (OECD 305; Cyprinus carpio, 25°C, conc.: 0.05 mg/L) Bioaccumulation is not expected. Log Kow: 4.5 (Measured)

🌱 Mobility in soil

Mobility in water: Absorbs in soil. Floats on water.

🌱 Results of PBT and vPvB assessment

Does not contain PBT and vPvB substances, at a concentration of 0.1% or more.

🌱 Endocrine disrupting properties

The product does not contain any substance with endocrine disrupting properties, at a concentration of 0.1% or more.

🌱 Other adverse effects

Heavy metal content: PCT, PCB and other chlorinated hydrocarbons: None. Environmental effects: Large spills may be hazardous to the environment. Spills may form a film on water surfaces causing impaired oxygen transfer. Water hazard class (German): WGK 1 (Classification by AwSV)

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

♻️ Waste Treatment Methods

Wastes of the product or used oil should be treated as hazardous waste.

🗂️ Product Disposal Recommendations

Disposal must be in compliance with national and local regulations.

🏷️ Waste Classification Codes

13 02 05* Mineral-based non-chlorinated engine, gear and lubricating oils. national code

15 01 10* Packaging containing residues of or contaminated by dangerous substances. national code

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN 9006

📦 Proper Shipping Name

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

⚠️ Transport Hazard Class

9 (M12)

Regulatory Information & Compliance

Chemical regulations, safety assessments, and regulatory compliance status

📋 Regulatory Summary

This safety data sheet has been prepared according to Regulation (EC) No 1907/2006 (mod .: 2020/878/EU) and to Regulation (EC) 1272/2008. Seveso category: not classified.

❌ Chemical Safety Assessment

No chemical safety assessment has been performed for this substance.

ℹ️ Additional Regulatory Information

The information given in this data sheet is based on our best knowledge at the time of publication. The information is related only to this product and is intended to assist its safe transport, handling and use.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the physical form of MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil?

MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil is a liquid appearing as bright, clear . It has characteristic odor.

What is the solubility of MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil?

gasoline, kerosene, toluene, etc.

What is MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil used for?

gas engine oil for industrial and professional use.

What are the hazard statements for MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil?

This substance has 1 hazard statements: H412: Harmful to aquatic life with long lasting effects.

What is the melting point of MOL Dynamic Mistral NG 10W - 30 synthetic diesel engine oil?

The melting point is typ. - 42℃ and the boiling point is not available.