Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INTERNATIONALI THINNER-EQUIPMENT CLEANER
- Product Code
- GTA713
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Marine and Protective Coatings markets.
Manufacturers & Suppliers
Akzo Nobel Pty Ltd.
manufacturer
51 McIntyre Road, Sunshine North, Victoria, Australia, 3020
(03) 9313 4555
Emergency Contacts
Emergency Contact
1800 680 071
24 hour
Poisons Advice
131 126
24 hours a day
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product contains the following substances that are classified hazardous according to the Australian WHS Hazardous Substances regulations.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylene | 0001330-20-7 | 50 - 100% | Yes |
| 1-Methoxy-2-propyl acetate | 0000108-65-6 | 10 - 25% | Yes |
| Ethyl Benzene | 0000100-41-4 | 10 - 25% | Yes |
Notes
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence do not require reporting in this section.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give nothing by mouth.
Remove contaminated clothing. Wash skin thoroughly with soap and water or use a recognised skin cleanser. Do NOT use solvents or thinners.
Irrigate copiously with clean fresh water for at least 10 minutes, holding the eyelids apart and seek medical attention.
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
INTERNATIONAL THINNER-EQPT CLEANER
---
INTERNATIONAL THINNER-EQPT CLEANER
---
INTERNATIONAL THINNER/EQPT CLEANER
---
International Thinner/Eqpt Cleaner
---
International Thinner/Eqpt Cleaner
---
International Thinner/Eqpt Cleaner
---
International Thinner/Eqpt Cleaner
---
International Thinner
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.
Gloves of an appropriate material should be worn during mixing and application. Nitrile or PVC gloves are generally recommended for products containing solvents.
Wear safety eyewear, e.g. safety spectacles, goggles or visors to protect against the splash of liquids. Eyewear should comply with AS/NZS1337. Wear a full face shield if mixing or pouring operations pose a risk of splashes.
In Liquid, Paste or Atomised form (e.g. Spray Application), workers must wear respirators with a filter Type A (Organic vapour) approved in accordance with AS/NZS 1716. Provision of other controls such as exhaust ventilation should be considered if practical. If applying large volumes (>100L) and If there is not sufficient ventilation or if there is a confined space, an Air Fed Respirator is strongly recommended. In Solid or Dust form (e.g. Sanding Cured product) workers must wear a Class P1 Particulate filter mask in accordance with AS/NZS1716. An Air Fed Respirator is strongly recommended.
Overalls which cover the body, arms and legs should be worn. Skin should not be exposed. Barrier creams may help to protect areas which are difficult to cover such as the face and neck. They should however not be applied once exposure has occurred. Petroleum jelly based types such as Vaseline should not be used.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint Related Material
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INTERNATIONALI THINNER-EQUIPMENT CLEANER?
The signal word is warning.
What is the physical form of INTERNATIONALI THINNER-EQUIPMENT CLEANER?
INTERNATIONALI THINNER-EQUIPMENT CLEANER is a liquid appearing as colourless liquid with colourless color. It has smell of solvent odor.
What is INTERNATIONALI THINNER-EQUIPMENT CLEANER used for?
Marine and Protective Coatings markets.
What are the hazard statements for INTERNATIONALI THINNER-EQUIPMENT CLEANER?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of INTERNATIONALI THINNER-EQUIPMENT CLEANER?
The melting point is Not Measured and the boiling point is 137.