Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
INTERNATIONAL THINNER-EQPT CLEANER commonly used intended use refer technical data sheet. application method refer technical data sheet..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapour.
- H312: Harmful in contact with skin.
- H315: Causes skin irritation.
- H332: Harmful if inhaled.
- H373: May cause damage to organs through prolonged or repeated exposure.
Precautionary Statements
- P102: Keep out of reach of children.
- P210: Keep away from heat / sparks / open flames / hot surfaces - No smoking.
- P235: Keep cool.
- P240: Ground / bond container and receiving equipment.
- P241: Use explosion-proof electrical / ventilating / light / equipment.
- P242: Use only non-sparking tools.
- P243: Take precautionary measures against static discharge.
- P260: Do not breathe mist / vapours / spray.
- P264: Wash thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective gloves / eye protection / face protection.
- P314: Get Medical advice / attention if you feel unwell.
- P321: Specific treatment (see information on this label).
- P322: Specific measures (see information on this label).
- P362: Take off contaminated clothing and wash before reuse.
- P363: Wash contaminated clothing before reuse.
- P501: Dispose of contents / container in accordance with local / national regulations.
- IF ON SKIN: Wash with soap and water.
- IF ON SKIN (or hair): Remove / Take off immediately all contaminated clothing. Rinse skin with water / shower.
- IF INHALED: Call a POISON CENTER or doctor / physician if you feel unwell.
- IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- In case of fire: Use alcohol resistant foam, CO2, powder, water spray for extinction. Do not use water jet.
- Store in a well ventilated place. Keep container tightly closed.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
Akzo Nobel Pty Ltd.
importer
51 McIntyre Road Sunshine North Victoria Australia, 3020
AU
(03) 9313 4555
(03) 9311 9141
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
1800 680 071
AU
24 hour
Poisons Information Centre
131 126
AU
24 hours a day
To provide telephone consultation to medical professionals and the general public in cases of acute and chronic poisonings
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
This product contains the following substances that are classified hazardous according to the Australian WHS Hazardous Substances regulations:
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylene | 0001330-20-7 | 50-100% | Hazardous |
| 1-Methoxy-2-propyl acetate | 0000108-65-6 | 10-25% | Hazardous |
| Ethyl Benzene | 0000100-41-4 | 10-25% | Hazardous |
Additional Information
[1] Substance classified with a health or environmental hazard. [2] Substance with a workplace exposure limit. [3] PBT-substance or vPvB-substance.
Composition Notes
The full texts of the Hazard (H) phrases are shown in Section 16. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence do not require reporting in this section.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give nothing by mouth.
Skin Contact
Remove contaminated clothing. Wash skin thoroughly with soap and water or use a recognised skin cleanser.
Eye Contact
Irrigate copiously with clean fresh water for at least 10 minutes, holding the eyelids apart and seek medical attention.
Ingestion/Swallowing
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
Immediate Medical Attention Required
In all cases of doubt, or when symptoms persist, seek medical attention. Obtain immediate medical attention if unconscious (inhalation), after eye contact, or if accidentally swallowed.
Medical Treatment
No data available
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and any vapour below occupational exposure limits suitable respiratory protection must be worn.
Hand Protection
Gloves of an appropriate material should be worn during mixing and application. Nitrile or PVC gloves are generally recommended for products containing solvents.
Eye Protection
Wear safety eyewear, e.g. safety spectacles, goggles or visors to protect against the splash of liquids. Eyewear should comply with AS/NZS1337. Wear a full face shield if mixing or pouring operations pose a risk of splashes.
Respiratory Protection
In Liquid, Paste or Atomised form (e.g. Spray Application), workers must wear respirators with a filter Type A (Organic vapour) approved in accordance with AS/NZS 1716. Provision of other controls such as exhaust ventilation should be considered if practical. If applying large volumes (>100L) and If there is not sufficient ventilation or if there is a confined space, an Air Fed Respirator is strongly recommended. In Solid or Dust form (e.g. Sanding Cured product) workers must wear a Class P1 Particulate filter mask in accordance with AS/NZS1716. An Air Fed Respirator is strongly recommended.
Skin/Body Protection
Overalls which cover the body, arms and legs should be worn. Skin should not be exposed. Barrier creams may help to protect areas which are difficult to cover such as the face and neck. They should however not be applied once exposure has occurred. Petroleum jelly based types such as Vaseline should not be used.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
1263
Proper Shipping Name
Paint Related Material
Transport Hazard Class
3
Packing Group
III
ADR Transport Precautions
No further information
IMDG Maritime Transport Precautions
No further information
IATA Air Transport Precautions
No further information
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for INTERNATIONAL THINNER-EQPT CLEANER?
The signal word for this substance is "warning".
What is INTERNATIONAL THINNER-EQPT CLEANER used for?
Intended use Refer Technical Data Sheet. Application Method Refer Technical Data Sheet.
What are the hazard statements for INTERNATIONAL THINNER-EQPT CLEANER?
This substance has 5 hazard statements: H226: Flammable liquid and vapour. H312: Harmful in contact with skin. H315: Causes skin irritation. H332: Harmful if inhaled. H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of INTERNATIONAL THINNER-EQPT CLEANER?
The melting point is Not Measured and the boiling point is 137°C.