Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
INTERGARD 405 PART B is a colourless. substance commonly used professional application of coatings and inks.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapour.
- H332: Harmful if inhaled.
- H303: May be harmful if swallowed or in contact with skin.
- H318: Causes serious eye damage.
- H315: Causes skin irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
- May cause damage to organs through prolonged or repeated exposure. (hearing organs)
Precautionary Statements
- Wear protective gloves.
- Wear eye or face protection.
- Wear respiratory protection.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
- No smoking.
- Use explosion-proof electrical, ventilating, lighting and all material-handling equipment.
- Use only non-sparking tools.
- Take precautionary measures against static discharge.
- Keep container tightly closed.
- Use only outdoors or in a well-ventilated area.
- Do not breathe vapour.
- Wash hands thoroughly after handling.
- Contaminated work clothing should not be allowed out of the workplace.
- Get medical attention if you feel unwell.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- Call a POISON CENTER or physician if you feel unwell.
- If experiencing respiratory symptoms: Call a POISON CENTER or physician.
- IF SWALLOWED: Call a POISON CENTER or physician if you feel unwell.
- IF ON SKIN (or hair): Take off immediately all contaminated clothing.
- Rinse skin with water or shower.
- IF ON SKIN: Wash with plenty of soap and water.
- Call a POISON CENTER or physician if you feel unwell.
- Take off contaminated clothing and wash it before reuse.
- If skin irritation or rash occurs: Get medical attention.
- IF IN EYES: Rinse cautiously with water for several minutes.
- Remove contact lenses, if present and easy to do.
- Continue rinsing.
- Immediately call a POISON CENTER or physician.
- Store locked up.
- Store in a well-ventilated place.
- Keep cool.
- Dispose of contents and container in accordance with all local, regional, national and international regulations.
- Wear appropriate respirator when ventilation is inadequate.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
International Farg AB
undefined
Holmedalen 3, Aspereds Industriomrade, SE-424 22 Angered, Sweden
SE
+46 (0) 31 928500
+46 (0) 31 928530
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
National advisory body/Poison Centre (For use only by licensed medical professionals.)
+46 (0) 31 928500
SE
Emergency Contact
+46 8 33 12 31
SE
Emergency Contact
+966 55 388 0087
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| xylene | 1330-20-7 | 25-52% | ⚠️ Hazardous |
| butan-1-ol | 71-36-3 | 10-20% | ⚠️ Hazardous |
| ethylbenzene | 100-41-4 | 10-25% | ⚠️ Hazardous |
| 2,4,6-tris(dimethylaminomethyl)phenol | 90-72-2 | 2.7% | ⚠️ Hazardous |
| ethylenediamine | 107-15-3 | 0.3% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Symptoms:
Harmful if inhaled. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.
🖐️ Skin Contact
Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes.
Symptoms:
May be harmful in contact with skin. Causes skin irritation. May cause an allergic skin reaction.
👁️ Eye Contact
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes.
Symptoms:
Causes serious eye damage.
🍽️ Ingestion/Swallowing
Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Symptoms:
May be harmful if swallowed. Irritating to mouth, throat and stomach.
🚨 Immediate Medical Attention Required
Get medical attention immediately. Call a poison center or physician. Chemical burns must be treated promptly by a physician.
Medical Treatment
No specific treatment.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
✅ Suitable Extinguishing Media
Use dry chemical, CO2, water spray (fog) or foam.
❌ Unsuitable Extinguishing Media
Do not use water jet.
⚠️ Specific Fire Hazards
Flammable liquid and vapour. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion. Runoff to sewer may create fire or explosion hazard.
🔥 Fire Fighting Instructions
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
🛡️ Firefighter Protection Equipment
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
🚨 Emergency Procedures
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Do not breathe vapour or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.
💧 Small Spill Procedures
Dilute with water and mop up if water-soluble. Alternatively, absorb with an inert dry material and place in an appropriate waste disposal container.
🌊 Large Spill Procedures
Approach the release from upwind. Contain and collect spillage with non-combustible, absorbent material and place in container for disposal according to local regulations.
🌍 Environmental Precautions
Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
🧹 Cleanup Methods
Dispose of via a licensed waste disposal contractor.
Cleanup Materials:
Contaminated absorbent material.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
⚠️ Handling Precautions
• Put on appropriate personal protective equipment (see Section 8).
• Persons with a history of skin sensitisation problems or asthma, allergies or chronic or recurrent respiratory disease should not be employed in any process in which this product is used.
• Do not get in eyes or on skin or clothing.
• Do not breathe vapour or mist.
• Do not ingest.
• Use only with adequate ventilation.
• Wear appropriate respirator when ventilation is inadequate.
• Do not enter storage areas and confined spaces unless adequately ventilated.
• Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use.
• Store and use away from heat, sparks, open flame or any other ignition source.
• Use explosion-proof electrical (ventilating, lighting and material handling) equipment.
• Use only non-sparking tools.
• Take precautionary measures against electrostatic discharges.
🏪 Storage Conditions
• Store in accordance with local regulations.
• Store in a segregated and approved area.
• Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink.
• Store locked up.
• Keep container tightly closed and sealed until ready for use.
• Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
• Do not store in unlabelled containers.
🧼 General Hygiene Measures
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.
🔥 Fire Prevention Measures
Eliminate all ignition sources.
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapour or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
🧤 Hand Protection
Use chemical resistant gloves classified under Standard EN 374: Protective gloves against chemicals and micro-organisms. Recommended: Viton® or Nitrile gloves. When prolonged or frequently repeated contact may occur, a glove with a protection class of 6 (breakthrough time greater than 480 minutes according to EN 374) is recommended. When only brief contact is expected, a glove with a protection class of 2 or higher (breakthrough time greater than 30 minutes according to EN 374) is recommended. The user must check that the final choice of type of glove selected for handling this product is the most appropriate and takes into account the particular conditions of use, as included in the user's risk assessment. NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provided by the glove supplier. Barrier creams may help to protect the exposed areas of the skin but should not be applied once exposure has occurred.
👁️ Eye Protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles and/or face shield. If inhalation hazards exist, a full-face respirator may be required instead.
😷 Respiratory Protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Recommended : multi-gas/vapour and particulate filter
🦺 Skin/Body Protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. When there is a risk of ignition from static electricity, wear anti-static protective clothing. For the greatest protection from static discharges, clothing should include anti-static overalls, boots and gloves. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
🌍 Environmental Exposure Controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
✅ Chemical Stability
The product is stable.
⚗️ Reactivity
No specific test data related to reactivity available for this product or its ingredients.
⚠️ Hazardous Reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
🚫 Conditions to Avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition.
🧪 Incompatible Materials
Reactive or incompatible with the following materials: oxidizing materials.
💨 Hazardous Decomposition Products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information & Environmental Impact
Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data
🌱 Toxicity
🌱 Persistence and degradability
🌱 Bioaccumulative potential
🌱 Mobility in soil
🌱 Results of PBT and vPvB assessment
🌱 Endocrine disrupting properties
🌱 Other adverse effects
Waste Disposal & Treatment Methods
Waste disposal procedures, treatment methods, and regulatory compliance requirements
♻️ Waste Treatment Methods
Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
🗂️ Product Disposal Recommendations
Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1263
📦 Proper Shipping Name
PAINT
⚠️ Transport Hazard Class
3 3
📋 Packing Group
III
🚢 IMDG Maritime Transport Precautions
Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Regulatory Information & Compliance
Chemical regulations, safety assessments, and regulatory compliance status
📋 Regulatory Summary
No known specific national and/or regional regulations applicable to this product (including its ingredients).
❌ Chemical Safety Assessment
No chemical safety assessment has been performed for this substance.
ℹ️ Additional Regulatory Information
Safety, health and environmental regulations specific for the product
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for INTERGARD 405 PART B?
The signal word for this substance is "danger".
What is the physical form of INTERGARD 405 PART B?
INTERGARD 405 PART B is a liquid. appearing as colourless. with colourless. color. It has solvent. odor.
What is the solubility of INTERGARD 405 PART B?
Insoluble in the following materials: cold water.
What is INTERGARD 405 PART B used for?
Professional application of coatings and inks
What are the hazard statements for INTERGARD 405 PART B?
This substance has 9 hazard statements: H226: Flammable liquid and vapour. H332: Harmful if inhaled. H303: May be harmful if swallowed or in contact with skin. H318: Causes serious eye damage. H315: Causes skin irritation. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317: May cause an allergic skin reaction. H335: May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. (hearing organs)
What is the melting point of INTERGARD 405 PART B?
The melting point is Not available. and the boiling point is Lowest known value: 119℃ (246.2ºF) (butan-1-ol)..