NextSDS Logo
Safety Data Sheet EN

ELECTRO CLEAN MEDIUM

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ELECTRO CLEAN MEDIUM
Product Code
ELECTRO CLEAN MIDIUM
Synonyms
Electro Clean 2, Safety Solvent

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

JMN Specialties, Inc. logo

JMN Specialties, Inc.

manufacturer

1100 Victory Drive – Westwego, Louisiana USA 70094

(504) 341-3749

http://www.jmnspecialties.com

Emergency Contacts

CHEMTEL

(800) 255-3924

CHEMTEL

+01-813-248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Asp. Tox. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H303 May be harmful if swallowed, in contact with skin or if inhaled
H313 May be harmful if swallowed, in contact with skin or if inhaled
H333 May be harmful if swallowed, in contact with skin or if inhaled
H341 Suspected of causing genetic defects
H350 May cause cancer
H371 May cause damage to organs
H412 Harmful to aquatic life with long lasting effects

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P103 Read label before use.
P201 Obtain special instructions before use
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust/fume/gas/mist/vapors/spray
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P281 Use personal protective equipment as required.
P281 Use personal protective equipment as required
P301 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
P303 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
P304 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P305 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing
P501 Dispose of contents/container: Treatment, storage, transportation and disposal must be in accordance with Federal, State/Provincial and Local Regulations, and product characteristics at time of disposal.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Trichloroethylene 79-01-6 50 - 75% Yes
Petroleum Distillate 64742-47-8 35 - 40% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from exposure area to fresh air immediately. If breathing has stopped, perform artificial resuscitation. Keep person warm and at rest. Treat symptomatically and supportively. Seek medical attention immediately. Qualified medical personnel should consider administering oxygen.

Skin contact

Remove contaminated clothing and wash affected skin with soap and water. If persistent irritation occurs, obtain medical attention. When using high pressure equipment, injection of product under the skin can occur. If high pressure injuries occur, the casualty should be sent immediately to a hospital. Do not wait for symptoms to develop.

Symptoms: persistent irritation

Eye contact

Flush eye with copious quantities of water. If persistent irritation occurs, obtain medical attention.

Symptoms: persistent irritation

Ingestion

Give large amounts of fresh water or milk immediately. Do not give anything by mouth if person is unconscious or otherwise unable to swallow. If vomiting occurs, keep head below hips to prevent aspiration. Treat symptomatically and supportively. Seek medical attention immediately.

Immediate Medical Attention

Seek medical attention immediately. If high pressure injuries occur, the casualty should be sent immediately to a hospital.

Medical Treatment

All treatments should be based on observed signs and symptoms of distress in the patient. Consideration should be given to the possibility that overexposure to materials other than this product may have occurred.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Determined by surrounding material. In case of fire, use water fog, dry chemical, CO₂, or "alcohol" foam.

Specific hazards

Containers may explode from internal pressure if confined to fire.

Instructions

Spilled product on ground may be slippery. Cool with water spray.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear appropriate personal protective equipment before approaching spill site.

Small spill

For small spills, dilute with water to sewer if allowed by local and state regulations. If unable to wash product with water, absorb with inert material (sand or other approved material) and dispose of in accordance with applicable regulations.

Cleanup methods

absorb with inert material (sand or other approved material) and dispose of in accordance with applicable regulations.

Materials: sand or other approved material

—

Related Products

Similar products with comparable safety profiles

E

Electrode Cleaning Solution for General Use

CAS: 7647-01-0

E

Electronic Cleaning Solvent

---

E

Electronic Cleaning Solvent Plus

---

X

X1 eXcellent Electrical cleaner

UFI: K8N0-K0EQ-Q005-XUM2

E

Electro-Gel

---

M

MECANIC CLEAN

---

U

Ultra Clean

UFI: 3ADM-WHXE-DC0N-UVYG

U

Ultra Clean

UFI: 3ADM-WHXE-DC0N-UVYG

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Do not inhale vapors and fumes. Wash thoroughly after handling. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep in a tightly closed container, stored in a cool, dry, ventilated area below 44°C (110°F). Protect against physical damage. Isolate from incompatible substances.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear
Colour Intensity
---
Form
---
Odor
Sharp Solvent
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
> 188.1°F (86.7°C)
Flash Point
156°F (68.8°C) estimated
Freezing Point
-120.6°F (-84.8°C)
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
< 1
Vapor Density
> 1
Relative Density
1.18 - 1.21
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
7.0%
Lower Explosive Limit
0.7%
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Not soluble
Solubility In Fat
---
Molecular Weight
No data available.
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Hazardous reactions

Not expected to be Explosive, Self-Reactive, Self-Heating, or an Organic Peroxide under US GHS Definition(s).

Incompatible

Oxidizers or Oxidizing Materials.

Decomposition

Will not occur

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

ACUTE TOXICITY FISH Product: LC50 - Pimephales promelas (fathead minnow) - 41 mg/l - 96.0 h, LOEC - other fish - 11 mg/l - 10.0 d, NOEC - Oryzias latipes - 40 mg/l - 10.0 d. (Trichloroethylene)

12.1 Toxicity

ACUTE TOXICITY AQUATIC INVERTEBRATES Product: EC50 - Daphnia magna (Water flea) - 18.00 mg/l - 48 h. (Trichloroethylene) CHRONIC TOXICITY FISH Product: This material has exhibited moderate toxicity to aquatic organisms. AQUATIC INVERTEBRATES Product: This material has exhibited moderate toxicity to aquatic organisms. TOXICITY TO AQUATIC PLANTS Product: IC50 - Pseudokirchneriella subcapitata (green algae) - 175.00 mg/l - 96 h. (Trichloroethylene)

PERSISTENCE AND DEGRADABILITY

BIODEGRADATION Product: No data available BIOLOGICAL OXYGEN DEMAND Product: No data available CHEMICAL OXYGEN DEMAND Product: No data available BOD / COD RATIO Product: No data available

No data available for biodegradation, BOD, COD, or BOD/COD ratio.

BIOACCUMULATIVE POTENTIAL

Product: Because these solvents in this product evaporate easily, if it is released to the environment during production and use, most of it eventually reaches the air. Trichloroethylene that reaches groundwater may be difficult to remediate. Trichloroethylene is moderately toxic to aquatic organisms and does not bioaccumulate.

Trichloroethylene does not bioaccumulate and is moderately toxic to aquatic organisms.

MOBILITY IN SOIL

Product: NOT expected to partition to water.

RESULTS OF PBT AND mPvB ASSESSMENT

Product: No data available.

No data available for the product.

OTHER ADVERSE EFFECTS

Product: An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. Harmful to aquatic life with long lasting effects. For terrestrial uses, do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

Disposal

Dispose of container and unused contents in accordance with federal, state and local requirements.

Waste Codes

40CFR261.20-24 RCRA hazardous waste RCRA
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1268
Shipping Name
Petroleum Distillates, n.o.s., Contains (Trichloroethylene and Petroleum Distillates)
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This Safety Data Sheet conforms to ANSI Z400.5, and to the format requirements and the International Chemical Safety Cards of the Global Harmonizing System. This SDS complies with 29 CFR 1910.1200 (HAZARD COMMUNICATION STANDARD).

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is ELECTRO CLEAN MEDIUM known by?

ELECTRO CLEAN MEDIUM is also known as: Electro Clean 2, Safety Solvent

What is the hazard signal word for ELECTRO CLEAN MEDIUM?

The signal word is danger.

What is the physical form of ELECTRO CLEAN MEDIUM?

ELECTRO CLEAN MEDIUM is a liquid with clear color. It has sharp solvent odor.

What are the hazard statements for ELECTRO CLEAN MEDIUM?

This substance has 7 hazard statements:

  • H303: May be harmful if swallowed, in contact with skin or if inhaled
  • H313: May be harmful if swallowed, in contact with skin or if inhaled
  • H333: May be harmful if swallowed, in contact with skin or if inhaled
  • H341: Suspected of causing genetic defects
  • H350: May cause cancer
  • H371: May cause damage to organs
  • H412: Harmful to aquatic life with long lasting effects