NextSDS Logo
Safety Data Sheet EN

Stainless Steel Cleaner & Polish

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Stainless Steel Cleaner & Polish
Product Code
02CA

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Manufacturers & Suppliers

W

Weiman Products

manufacturer

755 Tri-State Parkway 60031 Gurnee, IL

1-800-837-8140

M

Manitoulin Warehouse and Distribution

distributor

7035 Ordan Drive Mississauga, Ontario, L5T 1T1

905 283-1630

Emergency Contacts

Emergency Contact

1-800-535-5053

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aerosol Cat. 2 H223
Press. Gas (Liq.) H280

GHS Pictograms

GHS02 - Flammable

GHS02

GHS04 - Compressed gas

GHS04

Hazard Statements

H223 Flammable aerosol
H280 Contains gas under pressure; may explode if heated

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P211 Do not spray on an open flame or other ignition source
P251 Do not pierce or burn, even after use
P410+P403 Protect from sunlight. Store in a well-ventilated place
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 ℃/122 °F

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

The data for this section has not been processed yet.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.

Symptoms: May cause respiratory tract irritation.

Skin contact

If irritation occurs, flush skin with plenty of water. Get medical attention if irritation persists.

Symptoms: May cause skin irritation. Symptoms may include redness, drying, defatting and cracking of the skin.

Eye contact

In case of contact, immediately flush eyes with plenty of water. Remove contact lenses, if worn. If irritation persists, get medical attention.

Symptoms: May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling.

Ingestion

If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.

Symptoms: May be harmful if swallowed. May cause stomach distress, nausea or vomiting.

Immediate Medical Attention

In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where possible).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits.

Hands

Wear chemically resistant protective gloves.

Eyes

Safety glasses or goggles are recommended when using product.

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Skin/Body

Wear suitable protective clothing

Environmental

Maintain levels below Community environmental protection thresholds.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Gas
Physical State Data
gas
State Under Standard Conditions
---
Appearance
Emulsion
Colour
White
Colour Intensity
---
Form
---
Odor
Floral
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
No data available
Flash Point
>93.3 °℃ (> 200 °F) TCC (concentrated product)
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
No data available
Evaporation Rate
---
Vapor Pressure
No data available
Vapor Density
---
Relative Density
0.94
Bulk Density
---
Density
---
Flammability
Flammable aerosol Flammable aerosol
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
2900 - 5600 cP at 25 C (77 ºF)
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
AEROSOLS
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Stainless Steel Cleaner & Polish?

The signal word is warning.

What is the physical form of Stainless Steel Cleaner & Polish?

Stainless Steel Cleaner & Polish is a gas appearing as emulsion with white color. It has floral odor.

What is the solubility of Stainless Steel Cleaner & Polish?

No data available

What is Stainless Steel Cleaner & Polish used for?

Cleaner

What are the hazard statements for Stainless Steel Cleaner & Polish?

This substance has 2 hazard statements:

  • H223: Flammable aerosol
  • H280: Contains gas under pressure; may explode if heated

What is the melting point of Stainless Steel Cleaner & Polish?

The melting point is No data available and the boiling point is No data available.

Compliance Scanner

Scan your compliance