3M Stainless Steel Cleaner

Remove person to fresh air. Get medical attention.

No need for first aid is anticipated.

No need for first aid is anticipated.

Rinse mouth. If you feel unwell, get medical attention.

Use a fire fighting agent suitable for the surrounding fire.

Closed containers exposed to heat from fire may build pressure and explode.

Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice.

For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice.

Avoid release to the environment.

Collect as much of the spilled material as possible using non-sparking tools. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with water.

Do not use in a confined area with minimal air exchange. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing.

Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store away from heat.

Do not eat, drink or smoke when using this product. Wash thoroughly after handling.

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source.

Do not remain in area where available oxygen may be reduced. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.

Gloves made from the following material(s) are recommended: Nitrile rubber. Use gloves tested to EN 374

Indirect vented goggles. Use eye protection conforming to EN 166

Half facepiece or full facepiece supplied-air respirator. Use a respirator conforming to EN 140 or EN 136

Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment.

Stable.

This material is considered to be non reactive under normal use conditions

Hazardous polymerisation will not occur.

Heat. Sparks and/or flames.

Strong acids. Strong oxidising agents.

None known. Refer to section 5.2 for hazardous decomposition products during combustion.