Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- STAINLESS STEEL CLEANER & POLISH
- Synonyms
- Not applicable
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal polish
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Ecolab Inc.
manufacturer
1 Ecolab Place, St. Paul, Minnesota USA 55102
1-800-352-5326
Emergency Contacts
Emergency Contact
1-800-328-0026
Emergency Contact
1-651-222-5352
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| white mineral oil, petroleum | 8042-47-5 | 10 - 30% | No |
| Butane | 106-97-8 | 5 - 10% | No |
| propane | 74-98-6 | 1 - 5% | No |
| solvent naphtha (petroleum), medium aliph. | 64742-88-7 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention if symptoms occur.
Rinse with plenty of water.
Rinse with plenty of water.
Rinse mouth. Get medical attention if symptoms occur.
Medical Treatment
No specific measures identified.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Pressurised container: May burst if heated. Flammable aerosols
In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8.
Do not allow contact with soil, surface or ground water.
Stop leak if safe to do so.
Related Products
Similar products with comparable safety profiles
Stainless Steel Cleaner & Polish
---
3MTM Stainless Steel Cleaner & Polish
---
STARKE METAL POLISH
---
STARKE CRYSTAL CLEAR GLASS POLISH
---
GLASS POLISHING COMPOUND POLISHING SOLUTION
---
Metal Polish
UFI: SJPV-J00T-A000-Q6FM
Repair Stick Stainless Steel
---
STARKLE MILDEW CLEAN
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Contents under pressure. Do not puncture. Wash hands thoroughly after handling.
Keep in a cool, well-ventilated place. Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Effective exhaust ventilation system. Maintain air concentrations below occupational exposure standards.
No special protective equipment required.
No special protective equipment required.
No personal respiratory protective equipment normally required.
No special protective equipment required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
None known.
Decomposition products may include the following materials: Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations.
Dispose of as unused product.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is STAINLESS STEEL CLEANER & POLISH known by?
STAINLESS STEEL CLEANER & POLISH is also known as: Not applicable
What is the hazard signal word for STAINLESS STEEL CLEANER & POLISH?
The signal word is warning.
What is the physical form of STAINLESS STEEL CLEANER & POLISH?
STAINLESS STEEL CLEANER & POLISH is a aerosol appearing as aerosol with opaque, white color. It has citrus odor.
What is STAINLESS STEEL CLEANER & POLISH used for?
Metal polish
What are the hazard statements for STAINLESS STEEL CLEANER & POLISH?
This substance has 1 hazard statement:
- H223: Flammable aerosol.
What is the melting point of STAINLESS STEEL CLEANER & POLISH?
The melting point is No data available and the boiling point is > 100 °C.