NextSDS Logo
Safety Data Sheet EN

WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Aluminum brightener, Wheel cleaner.

Uses advised against

No relevant information available.

Manufacturers & Suppliers

H

Hunter's Sales

manufacturer

418 Railroad Ave. / P.O. Box 369, Twin City, GA 30471, USA

(888) 349-2436

Emergency Contacts

ChemTel Inc.

(800)255-3924

ChemTel Inc.

+1 (813)248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 4 H312
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Carc. Cat. 1A H350

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H290 May be corrosive to metals.
H301 Toxic if swallowed.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H350 May cause cancer. Route of exposure: Inhalation.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original container.
P260 Do not breathe mist/vapors/spray.
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection.
P301 + P330 + P331 If swallowed: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a poison center/doctor.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P406 Store in corrosive resistant container with a resistant inner liner.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sulfuric acid 7664-93-9 10% Yes
Hydrofluoric acid 7664-39-3 5% Yes
2-butoxyethanol 111-76-2 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product is not flammable. Use fire fighting measures that suit the environment.

Unsuitable media

None.

Specific hazards

During heating or in case of fire poisonous gases are produced.

Firefighter Protection

Wear self-contained respiratory protective device. Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate area and prevent access.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid splashes or spray in enclosed areas. Use only in well ventilated areas. Avoid contact with the eyes and skin. Open and handle receptacle with care. Avoid breathing mist, vapors, or spray. Keep out of reach of children.

Storage

Store in cool, dry conditions in well sealed receptacles. Store only in the original receptacle.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation.

Hands

Butyl rubber, BR, Nitrile rubber, NBR, Neoprene gloves

Eyes

Safety glasses. Follow relevant national guidelines concerning the use of protective eyewear.

Respiratory

Use suitable respiratory protective device in case of insufficient ventilation.

Skin/Body

Boots, Apron, Acid resistant protective clothing.

Environmental

No relevant information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Flash Point
---
Relative Density
---
Voc Content
---
Softening Point
---
Bulk Density
---
Crystallisation Point
---
Solidification Point
---
Physical State Data
liquid
Solubility In Water
---
Partition Coefficient
---
Flammability
---
Explosive Limits
---
Odor Threshold
Not determined.
Appearance
---
Molecular Weight
---
Upper Explosive Limit
---
Boiling Point
---
Odor
Acrid
Colour
Clear
Solubility
---
Evaporation Rate
---
Cloud Point
---
Vapor Pressure
---
Freezing Point
---
Solubility In Fat
---
Physical State
Liquid
Lower Explosive Limit
---
Vapor Density
---
Kinematic Viscosity
---
Decomposition Temperature
---
Metal Corrosion
---
Ph
---
Properties Status
---
Melting Point
---
Density
---
Colour Intensity
---
Form
Liquid
Dynamic Viscosity
---
Auto Ignition Temperature
---
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used and stored according to specifications.

Reactivity

No relevant information available.

Hazardous reactions

Reacts with strong oxidizing agents. Reacts with alkali (lyes). Reacts with amines. Corrosive action on metals. Toxic fumes may be released if heated above the decomposition point. Attacks materials containing glass and silicate.

Avoid

No relevant information available.

Incompatible

Alkalis. Oxidizers

Decomposition

Toxic fumes may be released if heated above the decomposition point.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2922
Shipping Name
CORROSIVE LIQUID, TOXIC, N.O.S. (HYDROFLUORIC ACID, SULPHURIC ACID)
Transport Class
8
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner?

The signal word is danger.

What is the physical form of WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner?

WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner is a liquid with clear color. It has acrid odor.

What is WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner used for?

Aluminum brightener, Wheel cleaner.

What are the hazard statements for WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner?

This substance has 5 hazard statements:

  • H290: May be corrosive to metals.
  • H301: Toxic if swallowed.
  • H312: Harmful in contact with skin.
  • H314: Causes severe skin burns and eye damage.
  • H350: May cause cancer. Route of exposure: Inhalation.