Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- epple 200/S toluene free
- Product Form
- Adhesive
- Product Code
- 2 05495 00000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive for the gluing of most diverse substrates.
Manufacturers & Suppliers
E. Epple & Co. GmbH
manufacturer
Hertzstr. 8 71083 Herrenberg
+49 7032 / 9771-17
www.epple-chemie.de
Emergency Contacts
Information center against poisoning Bonn
+49 (0) 228 / 19 240
DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polychloroprene solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylacetat EC: 205-500-4 | 141-78-6 | 24.9 - 49.9% | Yes |
| Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics EC: 927-510-4 | --- | 24.9 - 49.9% | Yes |
| 2,2-methylenebis(6-T-butyl-4-methylphenol) EC: 204-327-1 | 119-47-1 | 0.1 - 0.9% | Yes |
Full text of classification: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
Immediate Medical Attention
First Aid, decontamination, treatment of symptoms.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation. This can be achieved with local or room suction. If this should not be sufficient to keep aerosol and solvent vapour concentration below the exposure limit values, a suitable respiratory protection must be used.
For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm ; Breakthrough time: > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374 Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
Wear closely fitting protective glasses in case of splashes.
If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.Recommendation: Half-face mask Filter type: ABEK-P2
Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- Adhesives
- Transport Class
- 3
- Packing Group
- III
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for epple 200/S toluene free?
The signal word is danger.
What is the physical form of epple 200/S toluene free?
epple 200/S toluene free is a liquid appearing as liquid with yellow color. It has like solvents odor.
What is the solubility of epple 200/S toluene free?
Water solubility at 20 C: insoluble
What is epple 200/S toluene free used for?
Adhesive for the gluing of most diverse substrates.
What are the hazard statements for epple 200/S toluene free?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of epple 200/S toluene free?
The melting point is -83 C and the boiling point is 77 C.