NextSDS Logo
Safety Data Sheet EN

Puroite Ion Exchange Resin

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Puroite Ion Exchange Resin
Product Code
PG2000/PG20006a
Chemical Name
Sodium/Calcium Polystyrene Sulphonate

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

P

Puroite International Limited

manufacturer

Cowbridge Road, Pontyclun Rhondda Cynon Taft, Wales CF72 8YL

Emergency Contacts

Puroite International Limited

01443 229334

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Eye Irrit.

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Copolymer: Moisture Content: Crosslinked Polystyrene

Chemical Name CAS Number Concentration Hazardous
Crosslinked Polystyrene --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the particles and wash with water.

Skin contact

Consult a physician if any irritation persists.

Eye contact

Flush eye with water for at least 15 minutes and remove all particles.

Ingestion

If particles are inhaled, consult a physician. Give 2 glasses of water to drink. However, never give anything to drink to a patient when unconscious.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, CO2, Dry Chemical

Instructions

Wear self-contained breathing apparatus and full protective gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Cleanup methods

Sweep-up and transfer to containers for recovery or disposal, as in Section XIII.

—

Related Products

Similar products with comparable safety profiles

I

Ion exchanger I (strongly acidic cation exchanger, H⁺-form) GR for analysis Reag. Ph Eur

---

P

perfectION™ ion electrolyte B

---

P

perfectION™ Ion Electrolyte B Reference Electrode Filling Solution

---

P

Penacolite® Resin R-50

---

M

Molsiv Adsorbents 13X HP 10x20

---

I

Iron(III) oxide, Puratronic®

CAS: 1309-37-1

P

Purox* B Food/Pharma, ultra pure grade benzoic acid

---

U

UltraLute Resin

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Static discharges may accumulate on dry beads.

Storage

Store between 0°C and 50°C. Avoid freezing. Avoid dehydration (when rewetted the resin volume may increase and cause a rupture of the packaging).

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Normal ventilation is sufficient to control exposure.

Hands

Protective gloves are recommended.

Eyes

Eye protection (safety glasses) are recommended

Respiratory

Respiratory protection is not required for normal operation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
1.3
Solidification Point
---
Metal Corrosion
---
Appearance
Fine powder
Softening Point
---
Freezing Point
Not applicable
Decomposition Temperature
---
Relative Evaporation Rate
---
Partition Coefficient
---
Physical State Data
solid
Cloud Point
---
Density
---
State Under Standard Conditions
---
Properties Status
---
Evaporation Rate
---
Dynamic Viscosity
---
Ph
---
Explosive Limits
---
Voc Content
---
Molecular Weight
---
Crystallisation Point
---
Solubility In Fat
---
Odor Threshold
---
Bulk Density
---
Colour Intensity
---
Physical State
Fine powder
Solubility In Water
Virtually insoluble
Form
---
Flammability
---
Vapor Pressure
---
Kinematic Viscosity
---
Colour
Pale brown
Melting Point
---
Solubility
---
Flash Point
---
Vapor Density
---
Upper Explosive Limit
---
Boiling Point
Not applicable
Auto Ignition Temperature
>500°C
Lower Explosive Limit
---
Odor
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Material is stable under normal conditions of use.

Incompatible

nitric acid and strong oxidisers

Decomposition

Combustion products may include monomers, residual organics and carbon oxides and sulphur oxides. Dried resins start to burn at 230°C.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

landfill, usual methods for plastics, controlled incineration

Disposal

The material as supplied is not classified as hazardous waste and can be disposed of by landfill or usual methods for plastics according to local state and national regulations.

Waste Codes

57124 resins from water and foodstuff treatment national code
57125 resins with specific contaminants from chemical processes, metal industry and effluents treatment national code
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Neutral form not classified hazardous.

Chemical Safety Assessment Not performed

Industrial grade products are not intended for use in analytical and medical applications without extensive purification.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Puroite Ion Exchange Resin?

The signal word is no signal word.

What is the physical form of Puroite Ion Exchange Resin?

Puroite Ion Exchange Resin is a fine powder appearing as fine powder with pale brown color.