Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Chelex 100 Resin
- Product Code
- 1422842, 1422832, 1422834, 1422835, 1422823, 1422822, 1422843, 1422822EDU, 1422832EDU, 1422842EDU, 1432832, 1432832EDU, 1421253, 1421253EDU
- Chemical Name
- Glycine, N-(carboxymethyl)-, reaction products with chloromethylated divinylbenzene-styrene polymer
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Uses advised against
No information available
Manufacturers & Suppliers
Bio-Rad Laboratories Inc.
1000 Alfred Nobel Drive, Hercules, CA 94547, USA
Bio-Rad Laboratories, Life Science Group
manufacturer
2000 Alfred Nobel Drive, Hercules, California 94547, USA
Bio-Rad Laboratories Ltd
national supplier
The Junction, Station Road, Watford, WD17 1ET, UK
00800 00246 723
Emergency Contacts
CHEMTREC UK
44-870-8200418
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Glycine, N-(carboxymethyl)-, reaction products with chloromethylated divinylbenzene-styrene polymer 68954-42-7 | 68954-42-7 | 50 - 100% | No |
Full text of H- and EUH-phrases: see section 16 This product does not contain candidate substances of very high concern at a concentration >= 0.1% (UK REACH Article 59)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. IF exposed or concerned: Get medical advice/attention. Get medical attention immediately if symptoms occur.
Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.
Symptoms: Erythema (skin redness).
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area. Get medical attention if irritation develops and persists.
Symptoms: Redness and tearing of the eyes.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Call a doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not scatter spilled material with high pressure water streams.
No information available.
CAUTION: Use of water spray when fighting fire may be inefficient.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment as required. Evacuate personnel to safe areas. Avoid contact with skin, eyes or clothing.
Prevent further leakage or spillage if safe to do so.
Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash it before reuse. Ensure adequate ventilation. Avoid breathing vapours or mists. In case of insufficient ventilation, wear suitable respiratory equipment.
Keep containers tightly closed in a dry, cool and well-ventilated place. Store according to product and label instructions.
Wear suitable gloves and eye/face protection. Do not eat, drink or smoke when using this product. Avoid contact with skin, eyes or clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves.
Wear safety glasses with side shields (or goggles).
Use appropriate respiratory protection.
Wear suitable protective clothing. Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
Sensitivity to mechanical impact: None. Sensitivity to static discharge: None.
Strong acids. Strong bases. Strong oxidising agents.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The environmental impact of this product has not been fully investigated.
12.2. Persistence and degradability
No information available.
12.3. Bioaccumulative potential
There is no data for this product.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
No information available regarding PBT and vPvB assessment.
12.6. Endocrine disrupting properties Endocrine disrupting properties
No information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contact supplier for inventory compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Chelex 100 Resin?
The signal word is warning.
What is the physical form of Chelex 100 Resin?
Chelex 100 Resin is a liquid appearing as suspension with white color. It has odourless. odor.
What is Chelex 100 Resin used for?
Laboratory chemicals
What are the hazard statements for Chelex 100 Resin?
This substance has 3 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of Chelex 100 Resin?
The melting point is No data available and the boiling point is 100 °C.