Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Testomat-Indikator Typ 303 commonly used reagent for analysis.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H319: Causes serious eye irritation.
Precautionary Statements
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Gebrder Heyl Analysentechnik GmbH & Co. KG
manufacturer
Orleansstrae 75 b D-31135 Hildesheim
DE
+49 (0) 5121 2893390
+49 (0) 5121 2893367
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Giftinformationszentrum Nord
+49 (0) 551 19240
DE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Mixture of substances listed below with nonhazardous additions according to Regulation (EC) No 1272/2008.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,1'-iminodipropan-2-ol EC: 203-820-9 | 110-97-4 | 10-25% | ⚠️ Hazardous |
| Ethylendiamintetraacetic acid dipotassiummagnesium salt EC: 239-803-8 | 15708-48-2 | 0.1-2.5% | ⚠️ Hazardous |
| sodium 4-(4-dimethylaminophenylazo)benzenesulphonate EC: 208-925-3 | 547-58-0 | 0.1-2.5% | ⚠️ Hazardous |
Additional Information
For the wording of the listed hazard phrases refer to section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air; consult doctor in case of complaints.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Symptoms:
skin irritation
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
A person vomiting while laying on their back should be turned onto their side. Rinse out mouth and then drink plenty of water. Seek medical treatment.
Symptoms:
vomiting
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Protective gloves. Wear gloves according to EN 374. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Check protective gloves prior to each use for their proper condition. Preventive skin protection by use of skin-protecting agents is recommended. After use of gloves apply skin-cleaning agents and skin cosmetics. For the permanent contact gloves made of the following materials are suitable: Nitrile rubber, NBR. Recommended thickness of the material: 0.4 mm. Value for the permeation: Level = 6 (> 480 min). As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR. Recommended thickness of the material: 0.12 mm. Value for the permeation: Level = 2 (> 30 min).
👁️ Eye Protection
Tightly sealed goggles according to EN 166
😷 Respiratory Protection
Not required.
🦺 Skin/Body Protection
Protective work clothing
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Testomat-Indikator Typ 303?
The signal word for this substance is "warning".
What is Testomat-Indikator Typ 303 used for?
Reagent for analysis
What are the hazard statements for Testomat-Indikator Typ 303?
This substance has 1 hazard statements: H319: Causes serious eye irritation.
What is the melting point of Testomat-Indikator Typ 303?
The melting point is Undetermined. and the boiling point is Undetermined..