Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Testomat 2000 Indikator TH 2025
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Gebrüder Heyl Analysentechnik GmbH & Co. KG
manufacturer
Orleansstraße 75 b, D-31135 Hildesheim
+49 (0) 5121 289330
http://www.heyl.de
Emergency Contacts
Giftinformationszentrum Nord
+49 (0) 551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS01
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,1'-iminodipropan-2-ol EC: 203-820-9 | 110-97-4 | 2.5 - 10% | Yes |
| 2,2'-iminodiethanol EC: 203-868-0 | 111-42-2 | 2.5 - 10% | Yes |
| Ethylendiamintetraacetic acid dipotassium magnesium salt EC: 239-803-8 | --- | 2.5% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
A person vomiting while laying on their back should be turned onto their side. Rinse out mouth and then drink plenty of water. Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Testomat-Indikator Typ 303
---
3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S
---
AMH Elecsys cobas e 100
---
PolyTHF® 1000
CAS: 25190-06-1
Turmotemp II/400 CL 2
---
3M™ Attest™ 1292E Rapid Readout Biological Indicator
---
NAFTOSAFE HPT 77000
---
NAFTOSAFE HPT 77000
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Testomat 2000 Indikator TH 2025?
The signal word is danger.
What is the physical form of Testomat 2000 Indikator TH 2025?
Testomat 2000 Indikator TH 2025 is a fluid with green color. It has characteristic odor.
What is Testomat 2000 Indikator TH 2025 used for?
Reagent for analysis
What are the hazard statements for Testomat 2000 Indikator TH 2025?
This substance has 1 hazard statement:
- H202:
What is the melting point of Testomat 2000 Indikator TH 2025?
The melting point is Undetermined. and the boiling point is Undetermined..