Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R
- Product Code
- 70-2005-0348-3, 70-2005-0349-1, 70-2005-0440-8, 70-2005-0441-6, 70-2006-4903-9
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sterilization process indicator, To indicate attainment of conditions for sterilization.
Uses advised against
For Industrial or Professional use only.
Manufacturers & Suppliers
3M Australia
national supplier
Building A, 1 Rivett Road, North Ryde NSW 2113
136 136
www.3m.com.au
Emergency Contacts
Emergency Contact
1800 097 146
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
No need for first aid is anticipated.
No need for first aid is anticipated.
No need for first aid is anticipated.
Rinse mouth. If you feel unwell, get medical attention.
Immediate Medical Attention
If you feel unwell, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
None inherent in this product.
Firefighter Protection
Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area with fresh air. Observe precautions from other sections.
Avoid release to the environment.
Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and Safety Data Sheet. Seal the container.
Materials: appropriate solvent
Related Products
Similar products with comparable safety profiles
3M™ Attest™ 1292E Rapid Readout Biological Indicator
---
3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S
---
3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V
---
InSpec HA, InSpec HA Burstable Wipes, InSpec HA Burstable Mops
UFI: TA00-C0F3-300A-Q11V
BactT/ALERT® FA Bottle, BacT/ALERT® FN Bottle, BacT/ALERT® PF Bottle, BacT/ALERT® SA Bottle, BacT/ALERT® SN Bottle, BacT/ALERT® MP Bottle, BacT/ALERT® MB Bottle
---
ROCIMA™ 629 Biocide
---
Plate Count agar acc. ISO 4833, ISO 17410 and FDA-BAM
---
STABROM® 909 Biocide
UFI: D645-H06X-U00F-7MAW
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin contact with hot material.
No special storage requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No engineering controls required.
No chemical protective gloves are required.
None required.
None required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material is considered to be non reactive under normal use conditions
Hazardous polymerisation will not occur.
None known.
None known.
Not applicable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes.
Dispose of waste product in a permitted industrial waste facility.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product is regulated by the Therapeutics Goods Administration and is exempt from compliance with the Industrial Chemicals (Notification and Assessment) Act 1989 as amended. This product is an article therefore the Standard for the Uniform Scheduling of Medicines and Poisons Schedule is not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R?
The signal word is no signal word.
What is the physical form of 3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R?
3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R is a liquid. appearing as glass ampule with test strip and media, enclosed in a covered plastic vial. with multicolour color. It has nearly odourless odor.
What is the solubility of 3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R?
Not applicable.
What is 3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R used for?
Sterilization process indicator, To indicate attainment of conditions for sterilization.
What is the melting point of 3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R?
The melting point is No data available. and the boiling point is Approximately 100 °C [Details:(applies to media)].