NextSDS Logo
Safety Data Sheet EN

MOTIP LACQUER BLACK

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOTIP LACQUER BLACK
Product Code
04001 satin matt / 04005 high gloss / 04006 matt (500 ml) 00105 high gloss / 00106 matt (150 ml)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Paint

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

M

MOTIP DUPLI B.V.

manufacturer

Wolframweg 2, NL-8471 XC Wolvega, The Netherlands

+31 (0)561 694400

Emergency Contacts

Emergency Contact

+31 (0)561-694400

09:00h - 17:00h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol. Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe spray.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
acetone EC: 200-662-2 67-64-1 25 - 50% Yes
n-butyl acetate EC: 204-658-1 123-86-4 12.5 - 20% Yes
propane EC: 200-827-9 74-98-6 10 - 12.5% Yes
2-methoxy-1-methylethyl acetate EC: 203-603-9 108-65-6 5 - 10% Yes
butane EC: 203-448-7 106-97-8 5 - 10% Yes
isobutane EC: 200-857-2 75-28-5 5 - 10% Yes
butan-1-ol EC: 200-751-6 71-36-3 2.5 - 5% Yes
Nitrocellulose (nitrogen content <12.6%) 9004-70-0 2.5 - 5% Yes
propan-2-ol EC: 200-661-7 67-63-0 1 - 2.5% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Generally the product does not irritate the skin.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Drink plenty of water and provide fresh air. Call for a doctor immediately.

Medical Treatment

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Unsuitable media

Water with full jet

Specific hazards

No further relevant information available.

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.

Cleanup methods

Ensure adequate ventilation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation/exhaustion at the workplace.

Storage

Store in a cool location. Protect from heat and direct sunlight.

Fire prevention

Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Not required.

Eyes

Tightly sealed goggles

Respiratory

Not required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Aerosol
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
According to product specification
Colour Intensity
---
Form
Aerosol
Odor
Characteristic
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
Undetermined.
Boiling Point
Not applicable, as aerosol.
Flash Point
< 0 °C (< 32 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable.
Vapor Pressure
3500 hPa (2625 mm Hg)
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
0.77489 g/cm³ (6.466 lbs/gal)
Flammability
Not applicable.
Upper Explosive Limit
13.0 Vol %
Lower Explosive Limit
1.2 Vol %
Explosive Limits
---
Auto Ignition Temperature
333 °C (631 °F)
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Not miscible or difficult to mix.
Solubility In Fat
---
Molecular Weight
---
Voc Content
712.0 g/l
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

Disposal

Must not be disposed together with household garbage.

Waste Codes

08 01 11* waste paint and varnish containing organic solvents or other dangerous substances EWC
15 01 04 metallic packaging EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
Void
ADR

Warning: Gases.

IMDG

Warning: Gases.

IATA

Warning: Gases.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOTIP LACQUER BLACK?

The signal word is danger.

What is the physical form of MOTIP LACQUER BLACK?

MOTIP LACQUER BLACK is a aerosol with according to product specification color. It has characteristic odor.

What is MOTIP LACQUER BLACK used for?

Paint

What are the hazard statements for MOTIP LACQUER BLACK?

This substance has 3 hazard statements:

  • H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of MOTIP LACQUER BLACK?

The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..