Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite
- Product Code
- 302401 / 302402 / 302403
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PC9a Coatings and paints, thinners, paint removers, PROC7 Industrial spraying, PROC11 Non industrial spraying, ERC8a Wide dispersive indoor use of processing aids in open systems, ERC8d Wide dispersive outdoor use of processing aids in open systems, Paint
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolframweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbon black EC: 215-609-9 | 1333-86-4 | 1 - 2.5% | No |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1 - 2.5% | Yes |
| Solvent naphtha (petroleum), hydrotreated light naphthenic EC: 926-605-8 | 92062-15-2 | 1 - 2.5% | Yes |
| Polybutyl titanate EC: 500-687-1 | 162303-51-7 | 1 - 2.5% | Yes |
| Naphtha (petroleum), hydrotreated light EC: 921-024-6 | 64742-49-0 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 12.5 - 20% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 10 - 12.5% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 5 - 10% | Yes |
| Mica | 12001-26-2 | 2.5 - 5% | No |
| Solvent naphtha (petroleum), light arom. EC: 918-668-5 | 64742-95-6 | 2.5 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Ensure adequate ventilation.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 °C, i.e. electric lights. Do not pierce or burn, even after use.
Store in a cool location. Observe official regulations on storing packagings with pressurised containers. Protect from heat and direct sunlight.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Not required.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Warning: Gases.
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow "separated from" class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite?
The signal word is danger.
What is the physical form of MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite?
MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite is a aerosol appearing as according to product specification with according to product specification color. It has characteristic odor.
What is MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite used for?
SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PC9a Coatings and paints, thinners, paint removers, PROC7 Industrial spraying, PROC11 Non industrial spraying, ERC8a Wide dispersive indoor use of processing aids in open systems, ERC8d Wide dispersive outdoor use of processing aids in open systems, Paint
What are the hazard statements for MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of MOTIP DECO EFFECT HEAT RESISTANT LACQUER Black/Silver/Dark Anthracite?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..