NextSDS Logo
Safety Data Sheet EN

MOTIP DECO PAINT LACQUER

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOTIP DECO PAINT LACQUER
Product Code
01600 et cetera

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Paint

Manufacturers & Suppliers

M

MOTIP DUPLI B.V.

manufacturer

Wolfraamweg 2 NL- 8471 XC Wolvega The Netherlands

+31 (0)561 694400

Emergency Contacts

Emergency Contact

+31 (0)561-694400

09:00h - 17:00h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe spray.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
P501 Dispose of contents/container in accordance with local regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
N/A --- 25 - 50% Yes
N/A --- 12.5 - 20% Yes
N/A --- 10 - 12.5% Yes
N/A --- 10 - 12.5% Yes
N/A --- 5 - 10% Yes
N/A --- 2.5 - 5% Yes
N/A --- 1 - 2.5% Yes
N/A --- 0.1 - 1% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Drink plenty of water and provide fresh air. Call for a doctor immediately.

Immediate Medical Attention

No further relevant information available.

Medical Treatment

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Not required. Penetration time of glove material: Not required.

Eyes

Tightly sealed goggles

Respiratory

Not required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Aerosol
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
According to product specification
Colour Intensity
---
Form
Aerosol
Odor
Characteristic
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
Undetermined.
Boiling Point
Not applicable, as aerosol.
Flash Point
< 0 C (< 32 F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable.
Vapor Pressure
3500 hPa (2625 mm Hg)
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
0.758 g/cm (6.326 lbs/gal)
Flammability
Not applicable.
Upper Explosive Limit
13.0 Vol %
Lower Explosive Limit
1.5 Vol %
Explosive Limits
---
Auto Ignition Temperature
> 200 C (> 392 F)
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Not miscible or difficult to mix.
Solubility In Fat
---
Molecular Weight
---
Voc Content
575.7 g/l
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
AEROSOLS
Packing Group
Void
ADR

Warning: Gases.

IMDG

Warning: Gases.

IATA

Warning: Gases.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOTIP DECO PAINT LACQUER?

The signal word is danger.

What is the physical form of MOTIP DECO PAINT LACQUER?

MOTIP DECO PAINT LACQUER is a aerosol with according to product specification color. It has characteristic odor.

What is MOTIP DECO PAINT LACQUER used for?

Paint

What are the hazard statements for MOTIP DECO PAINT LACQUER?

This substance has 5 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of MOTIP DECO PAINT LACQUER?

The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..

Compliance Scanner

Scan your compliance