NextSDS Logo
Safety Data Sheet EN

Taski Sani Calc W3b

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Taski Sani Calc W3b

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For professional use only. AISE-P307 - Descaling agent. Manual process. AISE-P403 - Floor cleaner. Manual process

Uses advised against

Uses other than those identified are not recommended

Manufacturers & Suppliers

D

Diversey Europe Operations BV

manufacturer

Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands

D

Diversey Ltd

distributor

Weston Favell Centre, Northampton NN3 8PD, United Kingdom

01604 405311

Emergency Contacts

Emergency Contact

0800 052 0185

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P280 Wear eye or face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTRE, doctor or physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
phosphoric acid EC: 231-633-2 7664-38-2 10 - 20% Yes
alkyl alcohol ethoxylate 69011-36-5 3 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before re-use. If skin irritation occurs: Get medical advice or attention.

Symptoms: Causes irritation.

Eye contact

Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Causes severe or permanent damage.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Immediate Medical Attention

Immediately call a POISON CENTRE, doctor or physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

Specific hazards

No special hazards known.

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Sealed Air. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protective equipment as required. Avoid contact with eyes. Use only with adequate ventilation.

Storage

Store in accordance with local and national regulations. Keep only in original container. Store in a closed container.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.

Fire prevention

No special precautions required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Diluted: No special requirements under normal use conditions.

Hands

Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber, Penetration time: >= 480 min, Material thickness: >= 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber, Penetration time: >= 30 min, Material thickness: >= 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary.

Eyes

Undiluted: Safety glasses or goggles (EN 166). Diluted: No special requirements under normal use conditions.

Respiratory

Undiluted: No special requirements under normal use conditions. Diluted: No special requirements under normal use conditions.

Skin/Body

Undiluted: No special requirements under normal use conditions. Diluted: No special requirements under normal use conditions.

Environmental

Undiluted: Should not reach sewage water or drainage ditch undiluted or unneutralised. Diluted: No special requirements under normal use conditions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Molecular Weight
---
Physical State Data
liquid
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Solidification Point
---
Upper Explosive Limit
---
State Under Standard Conditions
---
Decomposition Temperature
Not determined
Odor
Slightly perfumed
Melting Point
Not determined
Density
---
Lower Explosive Limit
---
Form
---
Voc Content
---
Dynamic Viscosity
---
Bulk Density
---
Physical State
Liquid
Explosive Limits
---
Crystallisation Point
---
Vapor Density
Not determined
Appearance
---
Flammability
---
Auto Ignition Temperature
Not determined
Solubility
---
Colour
Clear, Red
Partition Coefficient
---
Ph
< 2 (neat)
Cloud Point
---
Flash Point
Not applicable.
Kinematic Viscosity
---
Properties Status
---
Odor Threshold
Not applicable
Vapor Pressure
Not determined
Boiling Point
Not determined
Solubility In Water
Fully miscible
Colour Intensity
---
Solubility In Fat
---
Relative Density
1.11 g/cm³ (20 °C)
Softening Point
---
Metal Corrosion
Corrosive
Freezing Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and use conditions.

Reactivity

No reactivity hazards known under normal storage and use conditions.

Hazardous reactions

No hazardous reactions known under normal storage and use conditions.

Avoid

None known under normal storage and use conditions.

Incompatible

Reacts with alkali and metals. Keep away from products containing chlorine-based bleaching agents or sulphites.

Decomposition

None known under normal storage and use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1805
Shipping Name
Phosphoric acid, solution
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Taski Sani Calc W3b?

The signal word is danger.

What is the physical form of Taski Sani Calc W3b?

Taski Sani Calc W3b is a liquid with clear, red color. It has slightly perfumed odor.

What is Taski Sani Calc W3b used for?

For professional use only. AISE-P307 - Descaling agent. Manual process. AISE-P403 - Floor cleaner. Manual process

What are the hazard statements for Taski Sani Calc W3b?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of Taski Sani Calc W3b?

The melting point is Not determined and the boiling point is Not determined.