Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- High Tech Anti Spatter Aerosol
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface protection
Manufacturers & Suppliers
ESAB DENTON
national supplier
2800 Airport Road, Denton, TX 76207
www.esab.com
Emergency Contacts
Emergency Contact
1-800-372-2123
No
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product is a mixture. This product contains active substance with propellant.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (2-methoxymethylethoxy)propanol EC: 252-104-2 | 34590-94-8 | 2.5 - 10% | No |
This product contains active substance with propellant.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, provide fresh air. If rapid recovery does not occur, obtain medical attention
Generally the product does not irritate the skin. Wash affected skin with water and mild soap.
Rinse opened eye for several minutes under running water. Remove contact lenses. If symptoms persist, consult a doctor.
Obtain medical attention. Do not induce vomiting.
Medical Treatment
Not applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use the extinguishing media recommended for the burning materials and fire situation. (eg foam, CO2, dry chemical powder, water spray, etc.)
Fumes or vapors may be harmful.
Remove containers that are close to the fire.
Firefighter Protection
Wear self-contained breathing apparatus as fumes or vapors may be harmful.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Surround any spillage with absorbent material. Dispose according to local regulations.
Materials: sand, mineral wool matting or some other suitable material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not spray onto a naked flame or any incandescent material. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric lights. Do not pierce or burn, even after use. Ensure good ventilation/exhaustion at the workplace. Wear eye protection to avoid eye injury. Keep away from food and drink. Retain all warning and identity labels.
Observe official regulations on storing pressurized containers. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep away from food and drink.
Do not spray onto a naked flame or any incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/exhaustion at the workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable under normal conditions. Stable under recommended storage conditions.
Not applicable
No dangerous reaction known under conditions of normal use
Not applicable
Not applicable
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Use recycling procedures if available.
Discard any product, residue, disposable container or liner in an environmentally acceptable manner, in full compliance with federal and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases
Warning: Gases
Warning: Gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This Safety Data Sheet complies with Annex II of 830/2015 amending EC No. 1907/2006, CLP directive 1272/2008, also in accordance with ISO 11014-1 and ANSI Z400.1
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for High Tech Anti Spatter Aerosol?
The signal word is warning.
What is the physical form of High Tech Anti Spatter Aerosol?
High Tech Anti Spatter Aerosol is a aerosol. appearing as pink colour with pink color. It has not applicable odor.
What is the solubility of High Tech Anti Spatter Aerosol?
Not miscible or difficult to mix with Water
What is High Tech Anti Spatter Aerosol used for?
Surface protection
What are the hazard statements for High Tech Anti Spatter Aerosol?
This substance has 2 hazard statements:
- H223: Flammable aerosol.
- H229: Pressurised container: May burst if heated
What is the melting point of High Tech Anti Spatter Aerosol?
The melting point is Not applicable and the boiling point is 100°C.