Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Anti-spatter spray, non-combustible
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial/professional use Special release spray
Uses advised against
Consumer use (by private households), avoid contact with foodstuffs, observe food safety regulations
Manufacturers & Suppliers
Alexander Binzel Schweißtechnik GmbH & Co. KG
manufacturer
Postfach 10 01 53 / D-35331 Gießen, Germany
+49 (0) 6408/59-0
Emergency Contacts
Poison Control Centre Mainz
+49 (0) 6131 19240
24 hour emergency service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixing of the substances listed below with non-dangerous admixtures.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Carbon dioxide EC: 204-696-9 | 124-38-9 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
When in contact, wash with soap and water.
If contact lenses are worn, remove these if possible. Continue rinsing. Hold the eyelids open and rinse with clean running water for at least 10 minutes.
Not applicable, aerosol can.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, alcohol-resistant foam, BC powder.
Full water jet.
The formation of explosive/highly flammable vapour/air mixtures is possible if there is insufficient ventilation and/or during use.
Immediately remove intact cans from the hazard area.
Firefighter Protection
Wear a fully protective suit. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the area.
Prevent entry into sewers, surface water and ground water. Contain and dispose of contaminated washing water.
Absorb the spill.
Materials: sawdust, kieselguhr (diatomite), sand or universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from ignition sources – no smoking. Take precautionary measures against electrostatic discharges. Use in well-ventilated areas only. Avoid heating to temperatures exceeding 50°C.
Protect against external influences such as: Frost
Wash hands after use. Do not eat, drink or smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Do not store food and beverages alongside chemicals. Do not use any containers for chemicals that are normally intended to be used to hold food. Keep away from foodstuffs, beverages and animal feeds.
Keep away from ignition sources – no smoking. Take precautionary measures against electrostatic discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
If used as intended, no protective equipment necessary. Do not spray in the eyes.
If used as intended, no protective equipment is necessary. Use outdoors or in well-ventilated areas.
If used as intended, no skin protection is necessary.
Use suitable containers to avoid environmental contamination.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See "Conditions to avoid" below.
For incompatibilities, see "Conditions to avoid" and "Incompatible materials" below. Risk of ignition
No hazardous reactions known.
High temperatures
No additional information available.
No reasonably anticipated hazardous decomposition products produced as a result of use, storage, spillage and heating are known. For details of hazardous combustion products, see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
German water hazard class (WGK): 1 (slight water hazard)
12.2 Persistence and degradability
12.3 Bioaccumulative potential:
No data available.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment:
12.6 Other adverse effects:
No data available regarding other adverse effects. No ingredients listed as endocrine disruptors.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste is to be separated in such a way that it can be handled separately by local or national waste disposal facilities.
Refer to special instructions/consult Safety Data Sheet.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Not assigned to a packing group
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Applicable regulations of the European Union (EU)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Anti-spatter spray, non-combustible?
The signal word is warning.
What is the physical form of Anti-spatter spray, non-combustible?
Anti-spatter spray, non-combustible is a aerosol appearing as aerosol (spray aerosol) with white color. It has odourless odor.
What is Anti-spatter spray, non-combustible used for?
Industrial/professional use Special release spray
What are the hazard statements for Anti-spatter spray, non-combustible?
This substance has 1 hazard statement:
- H229: Pressurized container: may burst if heated.