Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BIZERBA LABEL REMOVER
- Product Code
- 95948500000 (15mL), 95948100000 (250mL)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households (= general public = consumers) SU22 Professional uses: publicly accessible (administration, education, entertainment, services, craftsmen) PC35 Washing and cleaning products (including solvent based products) PROC10 Roller application or brushing ERC8B Wide dispersive indoor use of reactive substances in open systems ERC8D Wide dispersive outdoor use of processing aids in open systems
Uses advised against
No specific uses advised against are identified.
Manufacturers & Suppliers
Kleinmann GmbH
manufacturer
Am Trieb 13, D-72820, Sonnenbuehl
+49(0)7128/9292-15
http://www.kleinmann.net
Emergency Contacts
Emergency Contact
+49(0)7128/9292-15
8-12, Mo.-Fr.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Orange terpenes EC: 232-433-8 | 8028-48-6 | 60 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move injured person into fresh air immediately. Call an ambulance. Bring these instructions.
Symptoms: symptoms of lung oedema (shortness of breath) may develop up to 24 hours after exposure.
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if any discomfort continues.
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Continue flushing during transport to hospital.
Symptoms: irritation
Immediately rinse mouth and drink plenty of water or milk. Keep person under observation. Do not induce vomiting. If vomiting occurs, keep head low. Transport immediately to hospital and bring along these instructions.
Immediate Medical Attention
Call an ambulance. Get medical attention if any discomfort continues. Transport immediately to hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with alcohol-resistant foam, carbon dioxide or dry powder.
This product is not flammable. May ignite at high temperature. Vapours are heavier than air and may travel along the floor and in the bottom of containers. Vapours may be ignited by a spark, a hot surface or an ember. During fire, gases hazardous to health may be formed.
Reference is made to the company fire procedure. If risk of water pollution occurs, notify appropriate authorities. Avoid breathing fire vapours.
Firefighter Protection
Wear necessary protective equipment. For personal protection, see section 8.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Look out! The product is hazardous to your health. Wear necessary protective equipment. For personal protection, see section 8. In case of spills, beware of slippery floors and surfaces.
Smaller quantities of residue may be collected by an absorbent.
Avoid discharge into drains, water courses or onto the ground.
Smaller quantities of residue may be collected by an absorbent. Dam and absorb spillages with sand, earth or other non-combustible material.
Materials: absorbent, sand, earth or other non-combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use work methods which minimize spreading of vapours, dust, smoke, aerosols, splashes etc. to the extent technically possible. Avoid spilling, skin and eye contact. Avoid inhalation of vapours and spray mists. Keep away from heat, sparks and open flame.
Store in tightly closed original container in a well-ventilated place. Keep away from food, drink and animal feeding stuffs. Keep away from heat, sparks and open flame. Store above freezing.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
All handling to take place in well-ventilated area. Mechanical ventilation may be required.
Protective gloves should be used if there is a risk of direct contact or splash. Use protective gloves made of: Nitrile.
Eye protection is not required under normal conditions.
In case of inadequate ventilation use suitable respirator. Use respiratory equipment with combination filter, type A2/P2.
Wear apron or protective clothing in case of contact.
See section 6.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions and recommended use.
There are no known reactivity hazards associated with this product.
See section 10.4 and section 10.5.
Avoid heat, flames and other sources of ignition. Avoid frost.
alkalis, strong acids
Fire or high temperatures create: Flammable gases/vapours/fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2319
- Shipping Name
- TERPENE HYDROCARBONS, N.O.S. (Orange terpens)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BIZERBA LABEL REMOVER?
The signal word is danger.
What is the physical form of BIZERBA LABEL REMOVER?
BIZERBA LABEL REMOVER is a fluid. with colourless to pale yellow. color. It has citrus. odor.
What is BIZERBA LABEL REMOVER used for?
SU21 Consumer uses: Private households (= general public = consumers) SU22 Professional uses: publicly accessible (administration, education, entertainment, services, craftsmen) PC35 Washing and cleaning products (including solvent based products) PROC10 Roller application or brushing ERC8B Wide dispersive indoor use of reactive substances in open systems ERC8D Wide dispersive outdoor use of processing aids in open systems
What are the hazard statements for BIZERBA LABEL REMOVER?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of BIZERBA LABEL REMOVER?
The melting point is No data recorded. and the boiling point is Value: 177 °C.