Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dust Off 67
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaners - Precision
Manufacturers & Suppliers
CRC Industries Europe bvba
manufacturer
Touwslagerstraat 1, 9240 Zele, Belgium
+32(0)52/45.60.11
CRC Industries Finland Oy
distributor
Laurinkatu 57 A 23 B, 08100 Lohja
+358/(19)32.921
CRC Industries France
distributor
6, avenue du marais, C.S. 90028, 95102 Argenteuil Cedex
01.34.11.20.00
CRC Industries Deutschland GmbH
distributor
Südring 9, D-76473 Ilfezheim
(07229) 303 0
CRC INDUSTRIES IBERIA S.L.U.
distributor
GREMIO DEL CUERO-PARC.96, POLIGONO INDUSTR. DE HONTORIA, 40195 SEGOVIA
0034/921.427.546
CRC Industries Sweden
distributor
Laxfiskevågen 16, 433 38 Partille
0046/31 706 84 80
Emergency Contacts
CRC Industries Europe, Belgium
+32(0)52/45.60.11
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| tetrafluoroethane EC: 212-377-0 | 811-97-2 | 75 - 100% | Yes |
| dimethyl ether EC: 204-065-8 | 115-10-6 | 5 - 10% | Yes |
Notes
Explanation notes: A : substance with Community workplace exposure limit; B : substance with national established workplace exposure limit (* Explanation phrases : see chapter 16)
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, keep warm and at rest.
Symptoms: Excessive inhalation of solvent vapours may give rise to nausea, headaches and dizziness
In case of contact with liquid, thaw frosted parts with water, remove clothing carefully and wash with soap & water. Seek medical advice
Symptoms: In case of contact with liquid product frostbite symptoms may occur.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
Symptoms: In case of contact with liquid product frostbite symptoms may occur.
In case of accident or if you feel unwell, seek medical advice (show the label where possible)
Symptoms: Not available.
Immediate Medical Attention
If symptoms persist always call a doctor
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Allow product to evaporate
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Do not spray on a naked flame or incandescent material. Do not pierce or burn aerosols, even after use. Do not breathe aerosols or vapours. Ensure adequate ventilation. Avoid contact with skin and eyes.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Store in a well-ventilated place. Keep out of reach of children.
Keep away from heat and sources of ignition. Do not spray on a naked flame or incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Keep away from heat and sources of ignition
Wear suitable protective gloves. Recommended gloves: Insulating gloves
Wear safety goggles according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment. Compressed air mask.
Wear suitable protective gloves
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Avoid overheating
Strong oxidising agent
CO,CO2 HF may be formed under condition of fire
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
This material and its container must be disposed of in a safe way. Do not discharge into drains or the environment, dispose to an authorised waste collection point.
Do not discharge into drains or the environment, dispose to an authorised waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.2
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The Safety Data Sheet is compiled according to the current European requirements.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Dust Off 67?
The signal word is warning.
What is the physical form of Dust Off 67?
Dust Off 67 is a liquified gas. with colorless. color. It has perceptible odour. odor.
What is Dust Off 67 used for?
Cleaners - Precision
What are the hazard statements for Dust Off 67?
This substance has 1 hazard statement:
- H229: Pressurised container: May burst if heated.