Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2297PR PRESSOL MEHRZWECKFETT
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Manufacturers & Suppliers
Pressol Schmiergeräte GmbH
manufacturer
Am Gansacker 10 c, D-79224 Umkirch
+49 (0) 7665 / 9346 000
http://www.pressol.com
Emergency Contacts
Germany
+49 (0) 7161 / 802-400
NHS Direct
0845 4647
NHS Direct
111
NHS 24
08454 24 24 24
Republic of Ireland
01 809 2166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil-based mixture. Mineral oil with DMSO extract < 3 % as measured by IP 346.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mineral oil | --- | --- | No |
| DMSO extract | --- | 3% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
After contact with skin, wash immediately with plenty of water and soap.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Let water be drunken in little sips (dilution effect). Call a physician immediately. Do NOT induce vomiting.
Immediate Medical Attention
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See chapter 7. No additional measures necessary.
Wear suitable gloves. Recommended glove articles: DIN EN 374. Suitable material: NBR (Nitrile rubber). Breakthrough time (maximum wearing time): > 480 min (Thickness of the glove material: 0.4 mm). Breakthrough times and swelling properties of the material must be taken into consideration. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
Eye glasses with side protection.
With correct and proper use, and under normal conditions, breathing protection is not required. When splashes or fine mist form, a permitted breathing apparatus suitable for these purposes must be used. Suitable respiratory protection apparatus: Filtering Half-face mask (DIN EN 149), e.g. FFA P / FFP3.
Protective clothing.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2297PR PRESSOL MEHRZWECKFETT?
The signal word is no signal word.
What is the physical form of 2297PR PRESSOL MEHRZWECKFETT?
2297PR PRESSOL MEHRZWECKFETT is a paste with yellow-brown color. It has characteristic odor.
What is 2297PR PRESSOL MEHRZWECKFETT used for?
Grease
What is the melting point of 2297PR PRESSOL MEHRZWECKFETT?
The melting point is not determined and the boiling point is not determined.