Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2297PR PRESSOL MEHRZWECKFETT
- Product Code
- 2297PR
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Manufacturers & Suppliers
Pressol Schmiergeräte GmbH
manufacturer
Tiergartenstraße 5, D-79423 Heitersheim
+49 (0) 7634 / 50 60 000
http://www.pressol.com
Emergency Contacts
National Poisons Information Centre (Dublin)
01 8092166
NHS Direct
0845 4647
NHS Direct
111
NHS 24
08454 24 24 24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil-based mixture. Mineral oil with DMSO extract < 3 % as measured by IP 346.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
After contact with skin, wash immediately with plenty of water and soap.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Let water be drunken in little sips (dilution effect). Call a physician immediately. Do NOT induce vomiting.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, Extinguishing powder, Carbon dioxide (CO2).
Full water jet.
Do not inhale explosion and combustion gases.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Clean contaminated articles and floor according to the environmental legislation.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Do not eat, drink or smoke when using this product. Provide fresh air. Handle and open container with care. Conditions to avoid: generation/formation of aerosols.
Protect against: Frost. Keep away from heat. Protect from direct sunlight. Keep container tightly closed in a cool, well-ventilated place.
When using do not eat, drink, smoke, sniff.
No special measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
See section 7. No additional measures necessary.
Wear suitable gloves. Recommended glove articles: EN ISO 374. Suitable material: NBR (Nitrile rubber). Breakthrough time: > 480 min (Thickness of the glove material: 0.4 mm). Breakthrough times and swelling properties of the material must be taken into consideration. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
Eye glasses with side protection (EN ISO 16321).
With correct and proper use, and under normal conditions, breathing protection is not required. When splashes or fine mist form, a permitted breathing apparatus suitable for these purposes must be used. Suitable respiratory protection apparatus: Filtering Half-face mask (EN 149), e.g. FFA P / FFP3.
Protective clothing.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No hazardous reaction when handled and stored according to provisions. Heat.
No information available.
No information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
There are no data available on the mixture itself.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
There are no data available on the mixture itself.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6. Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2297PR PRESSOL MEHRZWECKFETT?
The signal word is no signal word.
What is the physical form of 2297PR PRESSOL MEHRZWECKFETT?
2297PR PRESSOL MEHRZWECKFETT is a paste with yellow-brown color. It has characteristic odor.
What is 2297PR PRESSOL MEHRZWECKFETT used for?
Grease
What is the melting point of 2297PR PRESSOL MEHRZWECKFETT?
The melting point is not determined and the boiling point is not determined.