Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PureSperm®100
- Product Form
- Sterile (autoclaved) isotonic salt solution containing colloidal-silica particles coated with silane.
- Product Code
- PS100-100, PS100-250, PS100-1000K
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For preparation of cells in vitro in the laboratory.
Manufacturers & Suppliers
NidaCon International AB
manufacturer
Flöjelbergsgatan 16B, SE-431 37, Mölndal, Sweden
+46 - 31 - 703 06 30
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains colloidal-size silica particles coated with silane and suspended in a physiological salt solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| colloidal-size silica particles | --- | --- | No |
| silane | --- | --- | No |
| physiological salt solution | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure. Transfer person to fresh air. If discomfort persists, obtain medical attention.
Wash off with an abundance of water and remove contaminated clothing.
After initial flushing with physiological saline, remove any contact lenses. Flush thoroughly with physiological saline for 15 minutes. If discomfort persists, obtain medical attention.
Rinse mouth with water and give water to drink. Never give water to unconscious person. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Unlikely to burn
None known
Firefighter Protection
Use correct equipment applicable to primary cause of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Always follow the community, state or federal regulations.
Wipe up using appropriate absorbent material and clean with water.
Materials: appropriate absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use care in handling. Use aseptic working techniques. Avoid inhaling, ingestion, and contact with eyes and skin.
Store at room temperature or if opened at +2° to +8°C.
Use aseptic working techniques.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Normal ventilation
Use protection gloves when handling large quantities.
Use safety goggles when handling large quantities.
If dried down to powder form, use face mask when handling large quantities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur
Avoid contact with oxidizing agents (such as nitric acid).
Thermal decomposition may yield oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
flush contents with tap water via a drain into the sewage system
open container and flush contents with tap water via a drain into the sewage system according to local community, state or federal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
See hazards identification.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PureSperm®100?
The signal word is no signal word.
What is the physical form of PureSperm®100?
PureSperm®100 is a liquid appearing as white/beige transparent liquid with white/beige color. It has odourless odor.
What is PureSperm®100 used for?
For preparation of cells in vitro in the laboratory.
What is the melting point of PureSperm®100?
The melting point is Approx 0°C and the boiling point is Approx 100°C.