Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GM501 SpermMobil
- Product Form
- Mixture
- Product Code
- 4 GM 501SMOBIL5, 4 GM 501SMOBIL5-S
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent designed for in vitro procedures, examination and assessment of human necrozoospermic ejaculates as well as immotile sperms.
Manufacturers & Suppliers
Gynemed GmbH & Co. KG
manufacturer
Wagenering 24b, D-23730 Sierksdorf, Germany
Emergency Contacts
Emergency Contact
+49 (0)4561 51325 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol Red Sodium Salt EC: 252-057-8 | 34487-61-1 | 1% | Yes |
| Theophylline EC: 252-057-8 | 58-55-9 | 1% | No |
| Ultrapure water EC: 231-791-2 | 7732-18-5 | 90% | No |
| Sodium Chloride EC: 231-598-3 | 7647-14-5 | 1% | No |
| Potassium Chloride EC: 231-211-8 | 7447-40-7 | 1% | No |
| Calcium chloride dihydrate | 10035-04-8 | 1% | Yes |
| Magnesium Sulphate Heptahydrate | 10034-99-8 | 1% | No |
| Sodium Pyruvate EC: 204-024-4 | 113-24-6 | 1% | No |
| Potassium Dihydrogen Phosphate EC: 231-913-4 | 7778-77-0 | 1% | No |
| Glucose anhydrous EC: 200-075-1 | 50-99-7 | 1% | No |
| Sodium lactate EC: 212-762-3 | 867-56-1 | 1% | No |
| Sodium Hydrogen Carbonate EC: 205-633-7 | 144-55-8 | 1% | No |
| EDTA-2Na EC: 205-358-3 | 6381-92-6 | 1% | Yes |
| Alanyl-Glutamine EC: 475-290-9 | 39537-23-0 | 1% | No |
| Solution (NON-ESS AA) | --- | 1% | No |
| Solution (NON-ESS + ESS AA) | --- | 1% | No |
| HEPES EC: 230-907-9 | 7365-45-9 | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Assure fresh air breathing. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Rinse immediately with plenty of water for at least 15 minutes.
Symptoms: pain, blinking or redness
Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Obtain emergency medical attention (for ingestion). Obtain medical attention if pain, blinking or redness persist (for eye contact).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
No additional information available.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Collect spillage.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash Hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep only in the original container in a cool ventilated place away from direct (sun)light. Do not freeze. Do not use after expiry date. The product can be safely used up to 7 days after opening the container when sterile conditions are maintained and the products are stored at 2-8°C.
Wash Hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in accordance with good industrial hygiene and safety. Avoid all unnecessary exposure.
Wear protective gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to meet the specifications of EU-directive 89/686/EEC and the standard EN374 derived from it.
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).
Wear appropriate mask. Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Wear fire/flame resistant/retardant clothing. Complete suit protecting against chemicals, flame retardant antistatic protective clothing. The type of protection must be selected according to the concentration and volume of the dangerous substance at the specific workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable after transport (max. 5 days) at elevated temperature (≤ 37° C). Stable for 6 months from date of manufacture.
No additional information available.
Not established.
Direct (sun)light. Extremely high or low temperatures.
Strong acids. Strong bases.
Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Avoid release to environment
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GM501 SpermMobil?
The signal word is no signal word.
What is the physical form of GM501 SpermMobil?
GM501 SpermMobil is a liquid with red transparent liquid color. It has odourless odor.
What is the solubility of GM501 SpermMobil?
Highly soluble in water.
What is GM501 SpermMobil used for?
Reagent designed for in vitro procedures, examination and assessment of human necrozoospermic ejaculates as well as immotile sperms.
What is the melting point of GM501 SpermMobil?
The melting point is No data available and the boiling point is No data available.