Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3MTM ESPETM ScotchbondTM Universal Etchant
- Product Code
- LE-F100-1014-5, LE-F100-1040-4, 70-2011-3906-3, 70-2011-4006-1, 70-2011-4007-9
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dental Product, Etching gel
Uses advised against
For use only by dental professionals
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| WATER | 7732-18-5 | 50 - 65% | No |
| PHOSPHORIC ACID | 7664-38-2 | 30 - 40% | No |
| SYNTHETIC AMORPHOUS SILICA, FUMED, CRYSTALLINE FREE | 112945-52-5 | 5 - 10% | No |
| POLYETHYLENE GLYCOL | 25322-68-3 | 1 - 5% | No |
| ALUMINUM OXIDE | 1344-28-1 | 2% | No |
3MTM ESPETM ScotchbondTM Universal Etchant 02/25/16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air.
Immediately flush with large amounts of water for at least 15 minutes. Remove contaminated clothing. Wash clothing before reuse.
Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue rinsing.
Rinse mouth.
Immediate Medical Attention
If you feel unwell, get medical attention (Inhalation). Get immediate medical attention (Skin, Eye, and Ingestion).
Medical Treatment
Not applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
None inherent in this product.
Firefighter Protection
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
Avoid release to the environment.
Collect as much of the spilled material as possible. Clean up residue with water.
Related Products
Similar products with comparable safety profiles
7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL
---
3M Unitek Transbond XT Primer
---
3M Unitek Transbond XT Primer
---
3MTM Stainless Steel Cleaner & Polish
---
BONDERITE M-ED ACID ETCH 2701
---
Eastman Tetrashield(TM) MP2103
---
TEGO® Addbond DS 1300
---
Eastman Tetrashield(TM) MP2101
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated skin contact. Do not breathe dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Wash contaminated clothing before reuse. Do not get in eyes.
Store away from heat. Keep only in original container. Store in a corrosive resistant container with a resistant inner liner.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Wash contaminated clothing before reuse.
Store away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well-ventilated area.
See Section 7.1 for additional information on skin protection.
Safety Glasses with side shields
None required.
See Section 7.1 for additional information on skin protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
Hazardous polymerization will not occur.
Heat
Strong bases
None known. Refer to section 5.2 for hazardous decomposition products during combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/ container in accordance with the local/regional/national/international regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3MTM ESPETM ScotchbondTM Universal Etchant?
The signal word is danger.
What is the physical form of 3MTM ESPETM ScotchbondTM Universal Etchant?
3MTM ESPETM ScotchbondTM Universal Etchant is a liquid appearing as slight characteristic odor, blue with blue color. It has slight characteristic odor odor.
What is 3MTM ESPETM ScotchbondTM Universal Etchant used for?
Dental Product, Etching gel
What are the hazard statements for 3MTM ESPETM ScotchbondTM Universal Etchant?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of 3MTM ESPETM ScotchbondTM Universal Etchant?
The melting point is Not Applicable .