Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S
- Product Code
- 70-2005-8641-3 70-2006-2052-7
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
To indicate attainment of conditions for sterilization.
Manufacturers & Suppliers
3M New Zealand Ltd
national supplier
94 Apollo Drive, Rosedale 0632, Auckland
(09) 477 4040
3m.co.nz
Emergency Contacts
National Poisons Centre
0800 764 766
24 hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 98 - 100% | No |
| Peptone Phytone | --- | 1 - 2% | No |
| Spore strip with Geobacillus stearothermophilus (previously Bacillus stearothermophilus) | --- | 0.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No need for first aid is anticipated.
No need for first aid is anticipated.
No need for first aid is anticipated.
No need for first aid is anticipated.
Immediate Medical Attention
Not applicable
Medical Treatment
Not applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Non-combustible. Use a fire fighting agent suitable for surrounding fire.
None inherent in this product.
No special protective actions for fire-fighters are anticipated.
Firefighter Protection
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area with fresh air. Observe precautions from other sections.
Avoid release to the environment.
Dispose of collected material as soon as possible.
Related Products
Similar products with comparable safety profiles
3M™ Attest™ 1292E Rapid Readout Biological Indicator
---
3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V
---
3M™ Attest™ Biological Indicators for Steam 1261, 1261P, 1262, 1262P & 1262R
---
AMH Elecsys cobas e 100
---
Testomat 2000 Indikator TH 2025
---
Testomat-Indikator Typ 303
---
Rapid fFN Level 1 / Negative Control, Rapid fFN Level 2 / Positive Control
---
TaqMan Gene Expression Assay, INV, S
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For industrial or professional use only.
No special storage requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No engineering controls required.
No chemical protective gloves are required.
None required.
None required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material is considered to be non reactive under normal use conditions
Hazardous polymerisation will not occur.
None known.
None known.
Not applicable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes.
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
All applicable chemical ingredients in this material are in compliance with NZIoC listing requirements.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S?
The signal word is no signal word.
What is the physical form of 3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S?
3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S is a liquid. appearing as glass ampule with test strip and media, enclosed in a covered plastic vial. . It has glass ampule with test strip and media, enclosed in a covered plastic vial. odor.
What is 3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S used for?
To indicate attainment of conditions for sterilization.
What is the melting point of 3MTM AttestTM Rapid Readout Biological Indicators 1291(Flash),1292 & 1292-S?
The melting point is No data available. and the boiling point is ± 100 °C [Details:(applies to media)].