Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AUTOL SPEZIAL FLUID N15
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- CM90-V041-Y009-WUE4
Identified Uses
Gear lubricant
Manufacturers & Suppliers
Enilive Schmiertechnik GmbH
manufacturer
Paradiesstraße 14, 97080 Würzburg, Germany
+49 (0)931-90098-0
Emergency Contacts
GIZ-Nord, Göttingen
+49 (0)551-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), solvent-refined light paraffinic EC: 265-091-3 | 64741-89-5 | 60 - 80% | Yes |
| White mineral oil (petroleum) EC: 232-455-8 | 8042-47-5 | 10 - 20% | Yes |
| White mineral oil (petroleum) EC: 265-157-1 | 64742-54-7 | 5% | Yes |
| Tris(isopropylphenyl)phosphate EC: 273-066-3 | 68937-41-7 | 2.5% | Yes |
| Zinc bis(O,O-diisooctyl)bis(dithiophosphate) EC: 249-109-7 | 28629-66-5 | 2.5% | Yes |
| 2-Tetradecyloxirane, reaction products with boric acid EC: 701-392-2 | --- | 1% | Yes |
| Benzene, polypropene derivatives, sulfonated, calcium salts (Polymer) EC: 616-278-7 | 75975-85-8 | 1% | Yes |
| Phenol, dodecyl-, branched (SVHC) EC: 310-154-3 | 121158-58-5 | 0.25% | Yes |
Contains the following substances of very high concern (SVHC) which are included in the Candidate List according to Article 59 of REACH: Phenol, dodecyl-, branched (Toxic for reproduction (Article 57c); Endocrine disrupting properties (Article 57(f) - environment); Endocrine disrupting properties (Article 57(f) - human health))
First Aid Measures
Emergency procedures for chemical exposure incidents
Move victim to fresh air; if necessary, provide artificial respiration or oxygen. If unconscious place in recovery position and seek medical advice.
Wash with generous amount of water and soap. Take off contaminated clothing and wash it before reuse.
In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an ophthalmologist.
Symptoms: Causes serious eye irritation.
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Symptoms: May be fatal if swallowed and enters airways. Danger of aspiration!
Immediate Medical Attention
Immediately get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and/or an exhaust system in the work area. Avoid generation of vapours/aerosols.
Protective gloves according to DIN EN 374. Glove material: nitrile rubber, polyvinyl chloride Layer thickness: 0,4 mm. Breakthrough time: >240 min. The breakthrough times determined in accordance with EN 374 Part III were not obtained under practical conditions. The recommended maximum wearing time is 50% of breakthrough time.
Tightly sealed goggles according to DIN EN ISO 16321-1:2022
Respiratory protection must be worn whenever the WEL levels have been exceeded. Recommendation: Use combination filter type A2/P2 according to EN 14387. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used.
Wear suitable protective clothing.
Refer to "6.2 Environmental precautions".
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Stowage and handling: Category A.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AUTOL SPEZIAL FLUID N15?
The signal word is danger.
What is the physical form of AUTOL SPEZIAL FLUID N15?
AUTOL SPEZIAL FLUID N15 is a liquid with blue color. It has characteristic odor.
What is the solubility of AUTOL SPEZIAL FLUID N15?
Not determined
What is AUTOL SPEZIAL FLUID N15 used for?
Gear lubricant
What are the hazard statements for AUTOL SPEZIAL FLUID N15?
This substance has 3 hazard statements:
- H304: May be fatal if swallowed and enters airways.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of AUTOL SPEZIAL FLUID N15?
The melting point is Not determined and the boiling point is Not determined.