Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BOSTIK 1400
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives.
Uses advised against
None known.
Manufacturers & Suppliers
Bostik SA
manufacturer
Immeuble "Le Jade", 253 Avenue du President Wilson, 93211 La Plaine Saint Denis, France
+33 (0)1 55 99 90 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Health hazard information is based on its components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methylcyclohexane EC: 203-624-3 | 108-87-2 | 25 - 40% | Yes |
| Methyl ethyl ketone EC: 201-159-0 | 78-93-3 | 10 - 20% | Yes |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclic, <5% n-hexane EC: 921-024-6 | --- | 10 - 20% | Yes |
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 10 - 20% | Yes |
| Rosin EC: 232-475-7 | 8050-09-7 | 0.1 - 1% | Yes |
| Hexane EC: 203-777-6 | 110-54-3 | 0.1 - 1% | Yes |
| Xylenes (o-, m-, p- isomers) EC: 215-535-7 | 1330-20-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/ attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses, if present and easy to do. Continue rinsing. Call a doctor immediately.
If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use CO2, dry chemical, or foam.
Use water spray or fog; do not use straight streams
Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point.
Contain and collect spillage with non-combustible absorbent material. Use clean non-sparking tools to collect absorbed material.
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat/sparks/open flames/hot surfaces. — No smoking. Take precautionary measures against static charges.
Keep only in the original container/package in a cool well-ventilated place. Keep from freezing.
Do not eat, drink or smoke when using this product. Regular cleaning of equipment, work area and clothing is recommended.
Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Gloves made of plastic or rubber.
Tight sealing safety goggles. Face protection shield.
Antistatic footwear. Wear fire/flame resistant/retardant clothing. Suitable protective clothing. Apron.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions. Sensitivity to Mechanical Impact: None. Sensitivity to Static Discharge: May be ignited by friction, heat, sparks or flames.
Stable under recommended storage conditions.
None under normal processing.
Keep away from heat, sparks and flames.
Strong acids and bases.
None under normal use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- Adhesives
- Transport Class
- 3
- Packing Group
- III
223, 955
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No information available regarding chemical safety assessment.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BOSTIK 1400?
The signal word is danger.
What is the physical form of BOSTIK 1400?
BOSTIK 1400 is a liquid appearing as viscous with yellow color. It has solvent odor.
What is the solubility of BOSTIK 1400?
Insoluble in water
What is BOSTIK 1400 used for?
Adhesives.
What are the hazard statements for BOSTIK 1400?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizziness
- H411: Toxic to aquatic life with long lasting effects
What is the melting point of BOSTIK 1400?
The melting point is No information available and the boiling point is 60 °C / 140 °F.