Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Bostlan Cu 100 (pwd)
- Product Form
- Copper granules
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for the aluminium alloying industry.
Manufacturers & Suppliers
BOSTLAN S.A.
manufacturer
Polg. Ind. Trobika, CP - 48100 MUNGIA, VIZCAYA SPAIN
Emergency Contacts
Emergency Contact
++ 34. 94.674.42.13
Available only during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Copper (Mn) EC: 231-159-6 | 7440-50-8 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take casualty away from the area of exposure to a well ventilated one.
Remove contaminated clothing and wash thoroughly the affected area with soap and water. If redness or soreness persists, seek medical attention.
Symptoms: redness or soreness
Wash eye thoroughly with plenty of running water. If irritation persists, obtain medical attention.
Rinse the mouth with water. If the casualty is conscious, give him / her water to drink and induce vomiting. Seek medical assistance.
Immediate Medical Attention
Seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Fire extinguisher for Class “D” must be used.
Never use water or CO₂.
In the solid form, there are no fire or explosion hazards. Fine chips or dust may ignite and should be stored in a well-ventilated area.
Firefighter Protection
Self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not applicable to product as supplied. Prevent the spilled products from reaching the riverbeds or contaminating the grounds.
Remove dust by use of a suitable vacuum cleaner.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling of the product as supplied should cause no problem. The product should be handled carefully to minimise the generation of airborne dust. Suitable protective equipment should be used where necessary to prevent inhalation and contact with eyes and skin.
Store in a dry place away from sources of ignition and heat. The warehouse will be well ventilated.
Store in a dry place away from sources of ignition and heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust ventilation may be required to control dust exposure. Such methods of control should take precedence over the use of respiratory equipment.
Use protective gloves.
Use protective glasses. Do not use contact lenses because they may produce severe damages.
If is not used, a suitable dust mask fitted with an appropriate filter may be required. The type of mask and filter will depend upon dust concentrations.
Wear suitable protective clothing to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable up to temperatures close to the melting point.
Contact with acids or strong oxidising agents generates explosive gas.
acids or strong oxidising agents
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal of waste should be undertaken by a licensed contractor in accordance with national, regional and local regulations.
Disposal of waste should be undertaken by a licensed contractor in accordance with national, regional and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to: Directive 67/548/CEE and Directive 1999/45/CE. Safety phrases: S23 Do not breathe vapours / gas / fumes.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Bostlan Cu 100 (pwd)?
The signal word is no signal word.
What is the physical form of Bostlan Cu 100 (pwd)?
Bostlan Cu 100 (pwd) is a solid. with greyish red. color. It has non specific one. odor.
What is the solubility of Bostlan Cu 100 (pwd)?
Insoluble in water and organic solvents
What is Bostlan Cu 100 (pwd) used for?
Product for the aluminium alloying industry.
What is the melting point of Bostlan Cu 100 (pwd)?
The melting point is 1083 °C. and the boiling point is 2.595 °C..