Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)
- Product Code
- 1.07734
Regulatory Identifiers
- CAS Number
- 7631-86-9 Check regulations →
- REACH No.
- A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Pharmaceutical production
Manufacturers & Suppliers
Merck Life Science UK Limited
New Road The Old Brickyard GILLINGHAM Dorset SP8 4XT UNITED KINGDOM
+44 (0)1747 833-000
Emergency Contacts
CHEMTREC
+44 (0)870 8200418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | --- | No |
Notes
No components need to be disclosed according to the applicable regulations.
First Aid Measures
Emergency procedures for chemical exposure incidents
The data for this section has not been processed yet.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Silica gel
CAS: 112926-00-8
Silica gel FIA coarse 0,071-0,63 mm, 1
---
Sulfonic Acid Bonded Silica Gel (Column)
---
Fumed Silicia Suspension 0,2 m anhydrous
---
Xylene for GC-HS, ChromSolv®.
CAS: 1330-20-7.
Chromab. columns SiOH, 3 mL, 200 mg
---
Amorphous Silica
CAS: 112945-52-5
SILICON CARBIDE PAPER #80-#1200
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact and Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)?
The signal word is no signal word.
What is the physical form of Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)?
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM) is a solid appearing as solid, white with white color. It has odorless odor.
What is Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM) used for?
Pharmaceutical production
What is the melting point of Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)?
The melting point is 1,713 C - (ECHA) 2,230 C .