Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Silica gel FIA coarse 0,071-0,63 mm, 1
- Product Code
- REF 815430.1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
a. Product for analytical use. Exposure Scenario Classification according REACh, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16. b. Product used as cleaning and filtration aid. Codes: SU 3, 9, 23, PC 2, 20, 29, 37, PROC 3, 5, ERC 4, 8a, 8b This exposure scenario is also integrated into sections 1-16.
Uses advised against
not described
Manufacturers & Suppliers
MACHEREY-NAGEL GmbH & Co. KG
manufacturer
Valencienner Str. 11, 52355 Dren, Germany
+49 2421 969 0
http://www.mn-net.com/SDS
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| silica EC: 231-545-4 | 7631-86-9 | 95 - 100% | No |
Notes
When not listed, mixtures are added with water [CAS No. 7732-18-5] to 100%.List of H and P phrases: see section 16.2.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation of dust fresh air should be inhaled.
Remove dust with wetted tissue.
Rub dust with teardrops from eyes
no data available
Symptoms: no data available
Immediate Medical Attention
No additionally recommendations.
Medical Treatment
No additionally recommendations.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)
CAS: 7631-86-9
Silica gel
CAS: 112926-00-8
Fumed Silicia Suspension 0,2 m anhydrous
---
Sulfonic Acid Bonded Silica Gel (Column)
---
Amorphous Silica
CAS: 112945-52-5
MultiSil ChloroSil 1.000 F
---
Ferrosilicon (73 % Si Regular Grade)
---
Silicon powder, crystalline
CAS: 7440-21-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not necessary.
Not necessary, recommended for often use.
Not necessary.
Not necessary. Use for dusty working a dust mask or a dust protection filter, class P1. Use for regularly working with dry powders a dust mask or a dust protection filter, class P3.
Not necessary.
Information not necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Silica gel FIA coarse 0,071-0,63 mm, 1?
The signal word is no signal word.
What is the physical form of Silica gel FIA coarse 0,071-0,63 mm, 1?
Silica gel FIA coarse 0,071-0,63 mm, 1 is a powder (solid) with white color. It has odorless odor.
What is Silica gel FIA coarse 0,071-0,63 mm, 1 used for?
a. Product for analytical use. Exposure Scenario Classification according REACh, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16. b. Product used as cleaning and filtration aid. Codes: SU 3, 9, 23, PC 2, 20, 29, 37, PROC 3, 5, ERC 4, 8a, 8b This exposure scenario is also integrated into sections 1-16.
What is the melting point of Silica gel FIA coarse 0,071-0,63 mm, 1?
The melting point is no data available and the boiling point is 1600 C.