Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Klüberlub BE 41-542
- Product Code
- 020269
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Klüber Lubrication München GmbH & Co. KG
manufacturer
Geisenhausenerstr. 7, 81379 München, Deutschland
+49 (0) 89 7876 0
Klüber Lubrication Belgium Netherlands
national supplier
Rue Cardinal Mercier 100, 7711 Dottignies, Belgium
+32 56 483333
Emergency Contacts
Antigifcentrum / Centre antipoisons
070 245 245
Emergency Contact
+49 89 7876 700
24 hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil. special lithium soap
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenol, isopropylated, phosphate (3:1) EC: 273-066-3 | 68937-41-7 | 1 - 2.5% | Yes |
| 2-(2-heptadec-8-enyl-2-imidazolin-1-yl)ethanol EC: 202-414-9 | 95-38-5 | 1 - 2.5% | Yes |
| triphenyl phosphate EC: 204-112-2 | 115-86-6 | 0.25 - 1% | Yes |
| Residual oils (petroleum), solvent-dewaxed; Baseoil — unspecified EC: 265-166-0 | 64742-62-7 | 20 - 30% | No |
| Residual oils (petroleum), hydrotreated; Baseoil — unspecified EC: 265-160-8 | 64742-57-0 | 20 - 30% | No |
| Distillates (petroleum), hydrotreated heavy naphthenic; Baseoil — unspecified EC: 265-155-0 | 64742-52-5 | 10 - 20% | No |
| lithium 12-hydroxystearate EC: 231-536-5 | 7620-77-1 | 10 - 20% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Obtain medical attention. Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.
Take off all contaminated clothing immediately. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse. Wash off immediately with plenty of water.
Symptoms: Erythema
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Seek medical advice.
Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do not induce vomiting without medical advice. Obtain medical attention. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Ensure adequate ventilation. Do not breathe vapours, aerosols.
Do not allow contact with soil, surface or ground water.
Pick up and transfer to properly labelled containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not repack. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.
Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.
Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Material: Nitrile rubber; Break through time: > 10 min; Protective index: Class 1; Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses
Not required; except in case of aerosol formation. Filter type: Filter type P
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Air: Should not be released into the environment. Soil: Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil. Water: Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
No conditions to be specially mentioned.
No materials to be especially mentioned.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil. Do not dispose of with domestic refuse. Dispose of as hazardous waste in compliance with local and national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Triaryl Phosphate Isopropylated, 2-(2-heptadec-8-enyl-2-imidazolin-1-yl)ethanol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Klüberlub BE 41-542?
The signal word is warning.
What is the physical form of Klüberlub BE 41-542?
Klüberlub BE 41-542 is a paste with brown color. It has characteristic odor.
What is the solubility of Klüberlub BE 41-542?
insoluble
What is Klüberlub BE 41-542 used for?
Grease
What are the hazard statements for Klüberlub BE 41-542?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Klüberlub BE 41-542?
The melting point is No data available and the boiling point is No data available.