NextSDS Logo
Safety Data Sheet EN

Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS

CAS 64742-49-0

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS
Product Code
23835

Regulatory Identifiers

CAS Number
64742-49-0 Check regulations →
REACH No.
01-2119484651-34-XXXX

Identified Uses

General chemical reagent

Uses advised against

The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).

Manufacturers & Suppliers

V

VWR International B.V.

distributor

Orlyplein 85, 1043 DS Amsterdam, Nederland

+31 20 480 8410

Emergency Contacts

National Poisons Information Center (NVIC)

030 2748888

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Asp. Tox. Cat. 1 H304
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 Take precautionary measures against static discharge.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P403 + P235 Store in a well-ventilated place. Keep cool.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C6, isoalkanes, <5% n-hexane EC: 931-254-9 64742-49-0 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Seek medical advice immediately. If breathing is irregular or stopped, administer artificial respiration. Seek medical advice immediately. If unconscious but breathing normally, place in recovery position and seek medical advice.

Symptoms: Cough. Lung irritation. Irritation to respiratory tract. Nausea.

Skin contact

Remove contaminated, saturated clothing immediately. Wash with plenty of water and soap. If skin irritation occurs: Get medical help. If extensive skin contact: get medical help immediately and kept under medical surveillance (hospitalization).

Symptoms: Minor irritation. Erythema (Redness).

Eye contact

Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist.

Symptoms: Conjunctival redness.

Ingestion

Immediately call a POISON CENTRE/doctor. Never give anything by mouth to an unconscious person or a person with cramps. Rinse mouth thoroughly with water. Spit out all liquid. Do not give water or any other liquid to drink (alcohol increases the toxic effects). Do NOT induce vomiting. Observe risk of aspiration if vomiting occurs.

Symptoms: Aspiration hazard. Nausea. Vomiting. Gastrointestinal complaints.

Immediate Medical Attention

Seek medical advice immediately (poison centre).

Medical Treatment

After inhalation: After massive inhalation administration of glucocorticoids (inhalative). If necessary, all further measures for pulmonary edema prophylaxis. After vapor inhalation cardiovascular and pulmonary functions should be carefully monitored. If breathing is irregular or stopped, administer artificial respiration. After skin contact: Wash with plenty of soap and water. If necessary, treat skin irritations with a dermatocorticoid foam. Treat symptomatically. After eye contact: Rinse immediately carefully and thoroughly with eye-bath or water. Treat symptomatically. After ingestion: Observe risk of aspiration if vomiting occurs. After swallowing: Do not induce vomiting. No oral administration of fluids, activated charcoal, or laxatives, no gastric lavage, but aspiration of the fluid from the stomach via a nasogastric tube, avoiding intubation, if this is possible within 60 minutes.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

ABC-powder, Carbon dioxide (CO2), Dry sand, Nitrogen

Unsuitable media

Full water jet.

Specific hazards

Flammable liquids. Risk of ignition. Vapour can form explosive mixtures with air. Vapours can travel considerable distances to a source of ignition where they can ignite, flash back, or explode. Closed containers may burst when pressure and temperature rise.

Instructions

Co-ordinate fire-fighting measures to the fire surroundings. Use water spray jet to protect personnel and to cool endangered containers.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear personal protection equipment (refer to section 8). Avoid contact with eyes and skin. Do not breathe gas/fumes/vapour/spray. Remove victim out of the danger area. First Aid, decontamination, treatment of symptoms.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Take up mechanically, placing in appropriate containers for disposal. Absorb with liquid-binding material. Ventilate affected area.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protection equipment (refer to section 8). Avoid contact with eyes and skin. Avoid inhalation of the product.

Storage

Keep container tightly closed and in a well-ventilated place. Keep/Store only in original container. Keep cool. Protect from sunlight. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.

Hygiene

Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 in the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: 120-240 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: >480 min, Recommended glove articles: VWR 112-3717 / 112-1381

Eyes

Eye glasses with side protection DIN-/EN-Norms EN 166. Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (EN 136/140). Recommendation: VWR 111-0206. Suitable material: AXP3. Recommendation: VWR 111-8932

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Molecular Weight
---
Cloud Point
---
Odor Threshold
---
Boiling Point
no data available
Solubility In Water
no data available
Crystallisation Point
---
Ph
no data available
Colour Intensity
---
Flammability
Highly flammable liquid and vapour.
Freezing Point
no data available
Odor
characteristic
Density
0.650 g/cm³ (20 °C)
Melting Point
no data available
Vapor Density
---
Evaporation Rate
no data available
Explosive Limits
---
Metal Corrosion
---
Relative Evaporation Rate
---
Softening Point
---
Properties Status
---
Partition Coefficient
no data available
Bulk Density
no data available
Physical State
liquid
Decomposition Temperature
Not applicable
State Under Standard Conditions
---
Flash Point
-35 °C
Solidification Point
---
Kinematic Viscosity
no data available
Vapor Pressure
280 hPa (20 °C)
Voc Content
---
Form
---
Appearance
---
Relative Density
---
Auto Ignition Temperature
> 230°C
Colour
colourless
Physical State Data
liquid
Upper Explosive Limit
no data available
Lower Explosive Limit
no data available
Dynamic Viscosity
no data available
Solubility In Fat
---
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The substance is chemically stable under recommended conditions of storage, use and temperature.

Reactivity

Reactive substance. Risk of ignition. Vapours can form explosive mixtures with air. May form explosive peroxides.

Hazardous reactions

Violent reaction with: Strong oxidising agents.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid high temperatures or direct sunlight.

Incompatible

Rubber articles

Decomposition

Decomposition products in case of fire: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult the appropriate local waste disposal expert about waste disposal.

Disposal

This product and its container must be disposed of as hazardous waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1268
Shipping Name
PETROLEUM DISTILLATES, N.O.S. (PETROLEUM SPIRIT)
Transport Class
3
Packing Group
II
ADR

Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS?

The signal word is danger.

What is the physical form of Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS?

Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS is a liquid with colourless color. It has characteristic odor.

What is Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS used for?

General chemical reagent

What are the hazard statements for Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS?

This substance has 4 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of Petroleum spirit 40-60°C (max. 0.01% aromatic hydrocarbons) AnalaR NORMAPUR® ACS?

The melting point is no data available and the boiling point is no data available.

Compliance Scanner

Scan your compliance