NextSDS Logo
Safety Data Sheet EN

SCP-700C (FD) Cleaner

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SCP-700C (FD) Cleaner
Product Code
71002209, 71002210, 71002213, 71002847, 71075651

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Ink cleaner for printing inks.

Uses advised against

Use only for intended applications.

Manufacturers & Suppliers

M

Matthews Marking Systems

6515 Penn Avenue, Pittsburgh, PA 15206

412.665.2500

M

Matthews Marking Systems

manufacturer

Zona Franca La Lima, Multitenant #8, Cartago, Costa Rica 30106

(506) 4000-1103

Emergency Contacts

Chemtrec US

1-800-424-9300

Chemtrec World

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336
Not Classified

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof electrical equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing vapour/ spray.
P264 Wash contaminated skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTRE/doctor if you feel unwell.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P370 + P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/ container in accordance with national regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methyl Ethyl Ketone EC: 201-159-0 78-93-3 90 - 100% Yes
Isopropanol EC: 200-661-7 67-63-0 5 - 10% Yes

Notes

This material does not contain any Hazardous Air Pollutants (HAPS) as defined by the Clean Air Act under the US Environmental Protection Agency (EPA).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. If breathing stops, provide artificial respiration. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Get medical attention immediately.

Symptoms: May cause respiratory system irritation. Overexposure may depress the central nervous system, causing dizziness and intoxication.

Skin contact

Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after washing. Wash clothing and clean shoes thoroughly before reuse.

Symptoms: Prolonged or repeated contact with skin may cause irritation, redness and dermatitis.

Eye contact

Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes and get medical attention.

Symptoms: This product is strongly irritating. Symptoms following overexposure may include the following: Severe irritation, burning, tearing and blurred vision. Prolonged contact causes serious eye and tissue damage.

Ingestion

Get medical attention immediately. Do not induce vomiting. Aspiration hazard if swallowed. Entry into the lungs following ingestion or vomiting may cause chemical pneumonitis.

Symptoms: May cause stomach pain or vomiting. May cause nausea, headache, dizziness and intoxication.

Immediate Medical Attention

Get medical attention immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.

Unsuitable media

Water spray.

Specific hazards

Flammable liquid and vapour. Vapours are heavier than air and may spread near ground and travel a considerable distance to a source of ignition and flash back.

Instructions

Evacuate area. Stop leak if safe to do so. Use water to keep fire exposed containers cool and disperse vapours. Use water spray to reduce vapours.

Firefighter Protection

Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No smoking, sparks, flames or other sources of ignition near spillage. Avoid contact with skin, eyes and clothing. Avoid inhalation of vapours. Wash thoroughly after dealing with a spillage. Eliminate all sources of ignition. Stop leak if safe to do so.

Environmental

Avoid release to the environment.

Cleanup methods

Dilute contained spill with water. Collect and place in suitable waste disposal containers and seal securely.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear protective clothing as described in Section 8 of this safety data sheet.

Storage

Keep only in the original container in a cool, well-ventilated place.

Hygiene

Do not eat, drink or smoke when using this product. Provide eyewash station and safety shower. Good personal hygiene procedures should be implemented. Wash skin thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

As this product contains ingredients with exposure limits, process enclosures, local exhaust ventilation or other engineering controls should be used to keep worker exposure below any statutory or recommended limits, if use generates dust, fumes, gas, vapour or mist. Use explosion-proof ventilating equipment.

Hands

It is recommended that chemical-resistant, impervious gloves are worn.

Eyes

Wear tight-fitting, chemical splash goggles or face shield.

Respiratory

If ventilation is inadequate, suitable respiratory protection must be worn. Organic vapour filter.

Skin/Body

Wear appropriate clothing to prevent repeated or prolonged skin contact.

Environmental

Keep container tightly sealed when not in use. Residues and empty containers should be taken care of as hazardous waste according to local and national provisions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colourless liquid.
Colour
Clear.
Colour Intensity
---
Form
---
Odor
Ketonic.
Odor Threshold
---
Ph
---
Melting Point
-86°C/-123°F
Boiling Point
79°C/147°F @ 760 mm Hg
Flash Point
-9°C/16°F Closed cup.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
3.7 (butyl acetate = 1)
Vapor Pressure
71.25 mm Hg @ 20°C/68°F
Vapor Density
2.4
Relative Density
0.804 g/cm3 804 g/l 6.7 lbs/gal
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
12.7 % vol
Lower Explosive Limit
1.8 % vol
Explosive Limits
---
Auto Ignition Temperature
404°C/759°F
Decomposition Temperature
Not applicable.
Solubility
Soluble in the following materials: Ketones. Slightly soluble in water.
Partition Coefficient
log Pow: 0.26
Solubility In Water
Slightly soluble in water.
Solubility In Fat
---
Molecular Weight
---
Voc Content
804 g/l, 6.7 lbs/gal
Metal Corrosion
---
Dynamic Viscosity
<5 cP @ 25°C/77°F
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures and when used as recommended.

Reactivity

There are no known reactivity hazards associated with this product.

Hazardous reactions

The following materials may react with the product: Acids. Alkalis. Strong oxidising agents.

Avoid

Avoid the following conditions: Heat, sparks, flames.

Incompatible

Avoid contact with the following materials: Acids. Alkalis. Strong oxidising agents.

Decomposition

Heating may generate the following products: Carbon dioxide (CO2). Carbon monoxide (CO).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal of this product, process solutions, residues and by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any local authority requirements.

Disposal

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
FLAMMABLE LIQUID, N.O.S.
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SCP-700C (FD) Cleaner?

The signal word is danger.

What is the physical form of SCP-700C (FD) Cleaner?

SCP-700C (FD) Cleaner is a liquid appearing as colourless liquid. with clear. color. It has ketonic. odor.

What is the solubility of SCP-700C (FD) Cleaner?

Soluble in the following materials: Ketones. Slightly soluble in water.

What is SCP-700C (FD) Cleaner used for?

Ink cleaner for printing inks.

What are the hazard statements for SCP-700C (FD) Cleaner?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of SCP-700C (FD) Cleaner?

The melting point is -86°C/-123°F and the boiling point is 79°C/147°F @ 760 mm Hg.

Compliance Scanner

Scan your compliance