NextSDS Logo
Safety Data Sheet EN

SCP-700C Cleaner

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SCP-700C Cleaner
Product Code
71002209, 71002210, 71002213, 71002847, 71075651

Regulatory Identifiers

CAS Number
N/A
UFI Code
0Q10-F0GF-0005-98D6

Identified Uses

Ink cleaner for printing ink

Uses advised against

Use only for intended applications

Manufacturers & Suppliers

Matthews Marking System logo

Matthews Marking System

manufacturer

Zona Franca La Lima, Multitenant #8, Cartago, Costa Rica 30106

(506) 4000-1103

http://matthewsmarking.com

Matthews Marking Systems, Germany logo

Matthews Marking Systems, Germany

Porschestr. 1a, Estenfeld, Germany D-97230

49 8052 95110

http://matthewsmarking.com

Emergency Contacts

Emergency Contact

112

24 Hours (EU excluding UK and Germany)

Chemtrec

1-703-527-3887

24 Hours (World including UK and Germany)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Eye Irrit. Cat. 2
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P233 Keep container tightly closed
P240 Ground and bond container and receiving equipment
P241 Use explosion-proof enclosures.
P242 Use non-sparking tools
P243 Take action to prevent static discharges
P261 Avoid breathing dust, fumes, gas, mist, vapours or spray.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves, protective clothing and eye protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P312 Call a doctor if you feel unwell.
P337 + P313 If eye irritation persists: Get medical attention.
P370 + P378 In case of fire: Use agents recommended in Section 5 to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P403 + P235 Store in a well-ventilated place. Keep cool
P501 Dispose of contents and container in accordance with local, regional, national, and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-Butanone EC: 201-159-0 78-93-3 90 - 99% Yes
Propan-2-ol EC: 200-661-7 67-63-0 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove person to fresh air and place in a position comfortable for breathing. Keep person at rest. If breathing is difficult, administer oxygen. If breathing has stopped, provide artificial respiration. If symptoms develop or persist, seek medical advice/attention.

Symptoms: Drowsiness, dizziness, headache, nausea, lowering of consciousness, respiratory distress, confusion, unconsciousness.

Skin contact

Remove contaminated clothing and shoes. Rinse skin with copious amounts of water [shower] for several minutes. Launder contaminated clothing before reuse. If symptoms develop or persist, seek medical advice/attention.

Eye contact

Rinse eyes with plenty of water for several minutes. Remove contact lenses if present and easy to do so. Protect unexposed eye. If symptoms develop or persist, seek medical advice/attention. Rinse eyes with plenty of gently flowing lukewarm water for 15 minutes. Remove contact lenses if present and easy to do so. Protect unexposed eye. If symptoms develop or persist, seek medical advice/attention.

Symptoms: Irritation, redness, pain, inflammation, itching, burning and tearing.

Ingestion

If swallowed, DO NOT induce vomiting unless told to do so by a physician or poison control center. Rinse mouth with water. Never give anything by mouth to an unconscious person. If spontaneous vomiting occurs, place on the left side with head down to prevent aspiration of liquid into the lungs. If symptoms develop or persist, seek medical advice/attention.

Immediate Medical Attention

Skin/eye burns require immediate treatment. Overexposure via inhalation requires urgent medical treatment.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water mist/fog, carbon dioxide, dry chemical or alcohol resistant foam.

Unsuitable media

Do not use water jet.

Specific hazards

Highly flammable liquid. Will be easily ignitable by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation.

Instructions

Fight fire from a maximum distance. Move containers from fire area if you can do it without risk. Use water spray/fog for cooling fire exposed containers. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. Always stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles. If this is impossible, withdraw from area and let fire burn. Stand by, at a safe distance, with extinguisher ready for possible re-ignition. A vapor-suppressing foam may be used to reduce vapors. Do not handle damaged containers unless specialized to do so.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full-face piece operated in positive pressure mode. Avoid contact with skin, eyes, hair and clothing. Do not breathe fumes/gas/mists/aerosols/vapors/dusts.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area. Extinguish any sources of ignition. All equipment used when handling the product must be grounded. Wear recommended personal protective equipment (see Section 8). Avoid contact with skin, eyes and clothing. Avoid breathing mist, vapor, dust, fume and spray. Do not walk through spilled material. Wash thoroughly after handling.

Environmental

Prevent further leakage or spillage if safe to do so. Discharge into the environment must be avoided.

Cleanup methods

Contain and collect spillage and place in suitable container for future disposal.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use appropriate personal protective equipment (see Section 8). Use only with adequate ventilation. Avoid breathing mist/vapor/spray/dust. Do not eat, drink, smoke, or use personal products when handling chemical substances. Avoid contact with skin, eyes and clothing. Wash affected areas thoroughly after handling. Keep away from incompatible materials (See Section 10). Keep containers tightly closed when not in use.

Storage

Keep containers tightly closed when not in use.

Hygiene

Do not eat, drink, smoke, or use personal products when handling chemical substances. Wash affected areas thoroughly after handling.

Fire prevention

Store away from heat, open flames and other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Emergency eye wash stations and safety showers should be available in the immediate vicinity of use or handling. Provide adequate ventilation to maintain the airborne concentrations of vapor, mists, and/or dusts below the applicable workplace exposure limits, while observing recognized national standards (or equivalent).

Hands

Chemical resistant, impervious gloves approved by the appropriate standards. Gloves must be inspected prior to use. Avoid skin contact with used gloves. Appropriate techniques should be used to remove used gloves and contaminated clothing.

Eyes

Safety glasses or goggles. Use eye protection equipment that has been tested and approved by recognized national standards (or equivalent).

Respiratory

If engineering controls do not maintain airborne concentrations below the applicable workplace exposure limits, or to an acceptable level (if exposure limits have not been established), a respirator approved by recognized national standards (or equivalent) must be worn.

Skin/Body

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Ensure that all personal protective equipment is approved by recognized national standards (or equivalent).

Environmental

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Colorless liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Not determined or not available.
Colour Intensity
---
Form
---
Odor
Ketonic
Odor Threshold
---
Ph
Not determined or not available.
Melting Point
-86°C/-123°F
Boiling Point
79°C/147°F
Flash Point
closed cup: -9°C/16°F
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
71.25 mm Hg @ 20°C/68°F
Vapor Density
---
Relative Density
Not determined or not available.
Bulk Density
---
Density
804 g/l ; 6.70 lbs/gal
Flammability
---
Upper Explosive Limit
12.7% volume
Lower Explosive Limit
1.8% volume
Explosive Limits
---
Auto Ignition Temperature
404°C/759°F
Decomposition Temperature
Not determined or not available.
Solubility
Soluble in the following materials: Ketones, Alcohols. Slightly soluble in water.
Partition Coefficient
log Pow: 0.26
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
804 g/l; 6.70 lbs/gal
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Not determined or not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions.

Reactivity

Not reactive under recommended handling and storage conditions.

Hazardous reactions

Hazardous reactions are not anticipated under recommended conditions of handling and storage.

Avoid

Extreme heat, open flames, hot surfaces, sparks, ignition sources, static electricity and incompatible materials. Vapor accumulation in low or confined areas.

Incompatible

None known.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Acute (short-term) toxicity Assessment: Based on available data, the classification criteria are not met. Product data: No data available. Substance data: | Name | Result | | --- | --- |

Based on available data, the classification criteria are not met.

12.1 Toxicity

| Name | Result | | Propan-2-ol | Fish LC50 Pimephales promelas: 10,000 mg/L (96 hr) | | | Aquatic Invertebrates EC50 Daphnia magna: >10,000 mg/L (48 hr [immobilization]) |

12.1 Toxicity

Chronic (long-term) toxicity | Name | Result | | Propan-2-ol | Aquatic Invertebrates NOEC Daphnia magna: 141 mg/L (16 d [growth]) |

12.2 Persistence and degradability

Product data: No data available. Substance data: | Name | Result | | --- | --- |

Product data: No data available.

12.2 Persistence and degradability

Readily biodegradable in water (98% degradation after 28 days).

12.2 Persistence and degradability

The substance has a BOD5/ThOD ratio of 0.50, and is therefore considered to be readily degradable.

12.3 Bioaccumulative potential

Product data: No data available. Substance data: Propan-2-ol | Bioaccumulation is not expected. BCF (aquatic species): 1.015 L/kg ww [QSAR]

12.4 Mobility in soil

Product data: No data available. Substance data: | Name | Result | | --- | --- | | Propan-2-ol | The substance is highly mobile in soil with a low potential for adsorption to soil and sediment. Koc at 20 °C: 3.478 |

12.5 Results of PBT and vPvB assessment

Product data: - PBT assessment: This product does not contain any substances that are assessed to be a PBT. - vPvB assessment: This product does not contain any substances that are assessed to be a vPvB. Substance data: PBT assessment: | 2-Butanone | Substance is not PBT. | | --- | --- | | Propan-2-ol | This substance is not PBT. | vPvB assessment: | 2-Butanone | Substance is not vPvB. | | --- | --- | | Propan-2-ol | This substance is not vPvB. |

The product does not contain any substances assessed to be PBT or vPvB. Both 2-Butanone and Propan-2-ol are assessed as not being PBT or vPvB.

12.6 Endocrine disrupting properties

Substance data: No data available.

No data available.

12.7 Other adverse effects

No data available.

No data available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Not determined or not available.

Disposal

Not determined or not available.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
Flammable liquid, N.O.S.
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

Not determined.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SCP-700C Cleaner?

The signal word is danger.

What is the physical form of SCP-700C Cleaner?

SCP-700C Cleaner is a colorless liquid with not determined or not available. color. It has ketonic odor.

What is the solubility of SCP-700C Cleaner?

Soluble in the following materials: Ketones, Alcohols. Slightly soluble in water.

What is SCP-700C Cleaner used for?

Ink cleaner for printing ink

What are the hazard statements for SCP-700C Cleaner?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapour
  • H319: Causes serious eye irritation
  • H336: May cause drowsiness or dizziness

What is the melting point of SCP-700C Cleaner?

The melting point is -86°C/-123°F and the boiling point is 79°C/147°F.